User Guide

Using the AV760

CAUTION: Do not connect the AV760 to systems

under high pressure. While the AV760 is designed to

withstand accidental exposure to positive pressures,

continued exposure may cause permanent damage.

1. Using the Appion Swivel Vacuum Connector

(included), connect the AV760 to an available

service port furthest from the vacuum pump.

2. Hand-tighten the connections to ensure a tight

connection. Never tool-tighten a knurled tting.

3. Press the Power button to turn on the AV760. A

countdown will display while the AV760 starts up

and performs self testing.

4. Press and hold the Units button for 1 second to

cycle the displayed Units (optional).

Tip: Connect to the Side Access Port on a Vacuum-

Rated Valve Core Removal Tool with the Appion

Swivel Vacuum Connector. Make sure the core

depressor side is attached to the Valve Core Removal

Tool.

Tip: Make sure the AV760 is vertical, with the

fitting pointed downward. This will help minimize

contamination from any oil that may be pulled out of

the system during evacuation.

AV760 OPERATION MANUAL