User`s guide

RV100 Family User’s Guide 64
• Make sure the monitor is receiving power.
• Check the pins on the monitor connector(s) to
ensure none are broken or bent.
• The brightness or contrast controls on your
monitor may not be adjusted correctly. Check
and readjust these controls.
• Make sure all monitors are enabled in the
Display Properties dialog box.
• Make sure the refresh rate is set correctly for
each monitor.
• Make sure the latest Appian display drivers are
installed.
• If you have a fixed frequency monitor, please
contact Appian Technical Support.
What if defects appear in my display?
• Make sure that both the graphics card and
monitor(s) support the resolution and refresh
rates you have selected. Refer to your monitor’s
documentation for recommended resolutions and
refresh rates.
• Make sure the latest Appian display drivers are
installed.
Why do application boxes always appear on the
primary monitor, when my application is on
another monitor?
In Windows 2000, most Microsoft Windows-
compatible programs are multiple-monitor aware.
However, many legacy applications are not. Some
legacy applications will display their dialog boxes
either split across two monitors, or only on the
primary monitor, regardless of which monitor that
application is running on.
In many cases, HYDRAVISION can solve this problem
through dialog repositioning.
1. Right-click the Appian icon on your taskbar.
2. Select Desktop Manager Configuration.
3. Select the Desktop Management tab.