User`s guide

41 Chapter 4: Software for Windows 2000 and XP
on the Driver tab in the next properties window
and then click on the Update Driver… button.
This starts the Hardware Update Wizard –
select the recommended method to install the
software automatically and then click Next>.
Click Finish on the Hardware Update Wizard
after the driver is installed. Click Close on the
Adapter properties window and select Yes when
prompted to restart the system. If you are using
a Rushmore graphics adapter, then you will have
to repeat this procedure for display number 2.
After the system restarts with all display drivers
updated, you can skip the following driver
installation steps and proceed directly to step 1 of
the HYDRAVISION software installation
instructions below. If you choose not to install
your driver automatically via the Internet, or for
some reason this option did not succeed, then
proceed to step 2 next.
2. Insert the Appian RV100 based product
installation CD-ROM into the appropriate drive.
3. Double-click on My Computer, right-click on the
CD-ROM drive with the CD installed, and then
click Open.
4. Double-click on the folder named
AppianDrivers. Now double-click on the
Windows XP driver installation file to begin the
installation process. This is the executable (.exe)
file that begins with “wxp…”.


 NOTE: The latest driver installation file can also
be downloaded from Appian Graphics’ web site at
http://www.appian.com.
5. Now simply follow the prompts and instructions
in the driver installation wizard.
6. The driver files are now installed. You will now
be prompted to restart the system. Click Yes.
7. Windows will restart in single monitor mode. You
can enable additional monitors and change the