User's Manual

9
APPI-Com V3.4 – Copy prohibited www.appi-technology.com
Remove a Bluetooth headset or Smartphone
For the two Bluetooth modes, the delete menu is
available from the Bluetooth menu by pressing.
Once the device is selected, confirm your choice.
Communication with a phone
The GSM communication is activated only during the calls: for an incoming call, the “incoming call” message
is played. You may accept it from the phone or set APPI-
Com to always take it thanks to the « Auto accept call »
function, in the “advanced configuration” menu.
The call ends with a « call terminated” message.
Public/Private Communication
By default, the (phone) BT communication is transmitted to the whole APPI-Com
group (Public mode). You can restrict it to the APPI-Com’s wearer (Private mode).
You can switch Private/Public from the menu, even during a call.
NOTE: The Private mode is activated during a call only. When the call ends, the
radio resumes the APPI team communication.
NOTE: during a Call in Private mode, the radio is considered « OUT » of the APPI-
Com group.
BT Audio settings
When you connect a BT device on top of a wired headset, its
configuration can be set in the “advanced configuration”
menu where two extra menus become accessible:
• Volume BT for the Bluetooth device:
• Vox BT: for the Bluetooth device (same function as
for the wired headset)
The settings are stored and used for the future connections.
Delete headset
MSA Left/Right
Select Next
Cancel
Delete phone
Phone1
Select Next
Cancel
SELECT MENU
 Volume BT ➔
Confirm
Volume BT
- 6 +
Confirm
SELECT MENU
 Vox BT ➔
Confirm
Vox BT
- 6 +
Confirm
SELECT MENU
Auto accept call➔
Confirm
Auto accept call
Enable Disable
Cancel
SELECT MENU
 Private/Public ➔
Confirm
Private/Public
Private Public
Cancel