User's Manual

APPI-Com V3.4 – Copy prohibited www.appi-technology.com

5. After clicking on “Add”, the window displays:

The left side of the window shows the ID of the two “Talk”

modules, while the left side zone displays all the

“Multiplex” modules added to the kit.

6. After choosing “Add”, you go back to the

validation step with the new added “Multiplex”

radio being listed:

7. In this example, Radio number C-000003, C-

000037, C-000137 and M-000009 are part of

kit #13, et can be heard by any APPI Radio in

Listen mode provided they enter the right kit ID

(13).

Radios C-00000003 and M-00000009 are the

priority ones and can be used with hands free,

while C-00000037 and C-00000137 are used in

“Multiplex” mode and may be connected to an

PTT or an adequate VOX level to make sure the

others can eventually talk.

NOTE: if a problem occurs when adding a « Multiplex »

module, all previous configurations are stored.

NOTE: It is possible to add as many Multiplex modules as

desired, but, for operational reasons, it is advised to limit

to 8 so that all users may have a chance to talk.

NOTE: a « Multiplex » radio can be part of up to 10 groups

If, while trying to add a Radio in a group, the Multiplex radio is already

configured with 10 other groups the following window will appear:

One must select the group to remove from the Multiplex list: the radio would

thus NOT be able to access this group.