User's Manual

15
APPI-Com V3.4 – Copy prohibited www.appi-technology.com
Specifics: the APPI-Com Radio
Attachment clip (Non ATEX Version)
The modules with an external antenna are provided with an attachment clip.
The clip can be installed in only ONE position ➔
NOTE: TOO MUCH FORCE TO PUT ON OR REMOVE
THE CLIP CAN DETERIORATE THE HOUSING OF THE MODULE.
Putting the clip on :
➔ Insert the module to fit the two notches
➔ Press the left side to clip the module in
Removing the clip:
➔ Spread the clip’s leg out externally with the finger
➔ At the same time, lift the module’s left side up from the clip
➔ When the module’s left side is out, remove the module completely
Positioning the mini-clip on the rubber
Install the mini-clip thanks
to the plastic rivet, its head
inside the rubber as shown