Users Manual

RF1276D27 Long Distance Transceiver module V4.0
- 8 - 2016-6-12
Node ID It is available in the Central/Node mode.
Net ID
Only the modules with the same network ID can communicate with
each other. It can avoid interferences from irrelative modules
Power
It is used to set the output power of RF1276D27. There are 7 power
levels. The 7 means the max. output power---20dBm and 0 means the
lowest output power.
Serial baudrate It defines the data rate between RF1276D27 and the host
Serial parity It defines the parity check between RF1276D27 and the host
Breath
It is available in the Central/Node mode.It defines the Breath period
of Node module.
Wake Timer
It is available for the Node module only. It defines the time of module
waking up to receive the preamble from Central module.
Table 2: Parameter Specification
Figure 3: Interface of RF Tool