Datasheet

2
Individual protective device must be used if hazardous live parts in the installation where the measurement is to be
carried out could be accessible.
The barrier is for indicating the limit of safe access of the hand-held part.
1-3 Front Panel
Refer to Figure 1 and the following numbered steps to familiarize yourself with the meter's front panel controls and
connectors.
1. Red LED — Low battery display.
2. Green LED — Power on display.
3. Coiled Cable Output Leads — Voltage output.
4. Function Switch — Slide switch used to select measuring function.
5. DC Zero Adj. knob — Zero adjusts on DC current ranges.
6. Trigger — Press the lever to open the transformer jaws.
7. Transformer Jaws — Designed to pick up the a.c./d.c. current following through the conductor.