Operation Manual

4
7. Ω / < AC/DC Selection Switch — Push the "Ω / <, AC/DC" switch alternately to measure AC voltage or DC
voltage in the " V I " function or to measure AC current or DC current in the " A I " function or to measure
resistor or continuity in " Ω<" function.
Auto power off disable mode — Press this switch until slide the function switch power on for 1 second it will
cause the auto power off function disable.
8. Trigger — Press the lever to open the transformer jaws. When the pressure on the lever is released , the jaws
will close again.
9. Hand Guard — Designed to protect user for safety.
10. Transformer Jaws — Designed to pick up the AC/DC current flowing through the conductor.