Owner's Manual

Car Rear View Camera Instruction
• Car Rearview/Reverse/Backup camera
• Color CMOS/CCD,PAL/NTSC
• High Definition and
Wide Viewing Angles
•
Waterproof and Night vison
1.
Wire connection
Our cameras are applicable to all types of vehicles, and with three main types-
unlversal,special,and wireless . They should be Installed
at pr oper position and
used with car DVD playe
r, monitor, GPS, parking sensor, etc.
2. Installation
2.1.Universal and special rearview camera
2.1.1 Wire Connection
Once the reverse gear shift power on, camera will work automatically
(]::J- < 0{ ~,'~ <: ort="! L ..,I1'{ @1 ) ~~ o::>-~
(Diagram 1)
(
Diagram2 )
(DiagramS)
<D DC line connect with camera's DC scoket and reversing power(The red
wire end Is positive while the black one Is negative) while AV line connect
with camera's AV scoket and display devices.(Diagram 1)
®
The all in one line wi re : one end's DC jack and AV jack connect with
camera's DC and
AV socket while the thin line end connect with reversing
power{The red wire end Is positive while the black
onels negatlve);Antother
end connect with display devices while the thin line end
is for reversing
control use.(Diagram 2)
@ One end
of the wire connect with camera while another end connect with
display devices, and the thin line end connect with reversing power(The
red wire end Is positive while the
black one is negative) (Diagram 3)
2.1.2 Camera Installation
Our cameras can be installed In the following ways:
A.
Bracket-mount and special rearview camera's mount (Diagram 4)
Cameras can be Installed on or near the license plate light. Fix the camera
with screws.
~
[
•
]
(Diagram4) (Diagram S)
B. Licence plate screw hole-mount (Diagram 5)
Camera~ can be installed on the screw hole of the licence plate easily
without drilling.
C. Flush/recessed/drilling- mount (Diagram 6,7,8)
Cameras can be installed
by dr illing a hole on rear bumper or back case.
~ (Diog~e) ~ ~og~m7) (Diag...,e)
\ tl
u
0