Introduction to your SmartNav 5 from App-Tronics The SmartNav 5 is the first truly captive all-in-ane rearview mirror offering users GPS navigation with turn-by-turn directions from /GO Primo. SmartNav 5 also features DVR continuous recording, reverse HD camera, Bluetoath 4.0, music player, video player and a photo viewer with upload capabilities from one of its two Micro 32GB SD card slots.
Disclaimer for general purpose and use of our products: Driver acknowledges that the media player is not to be used by the driver when the vehicle is in motion. Driver shall be obligated to notify anyone who takes over operation of the vehicle while the media player is turned on and that it is not to be used by the driver when the vehicle is in motion. Driver acknowledges that he or she has been made aware of this disclaimer before turning on the media player.
Table of Contents PAGE NUMBERS TITLE NAMES 5MARTNAV 5 ACCESSORI ES•-- - - - - - - - - - - - - - - - - - - -1 INSTAI.LATION MAN"""- -- -- - - -- -- - - -- -- - - -- Sma rtNa v 5 acce ssor ies Upgrade kit now availabl e! SmartNa v 5 can be upgraded to allow the Drive Applicatio n to alert drivers of law enforcem ent radar and diffuse their laser guns.
Installation Manual: Follow instructions using illustrations for reference. App-Tronics recommends the use of one of our Authorized dealers for installation of the SmartNav 5. Please contact us to receive a list of available dealers near you. The extended warranty can only be given when installed by an Authorized Dealer. Chapter one ( 1) parts description: Wiring harness SmartNav 5 rearview mirror All SmartNav S's come with an auxiliary port to allow for direct tie into vehicles audio system.
Chapter two (2) connection points overview: Reversing camera (optional non LED camera available for 2nd or 3rd child safety cam) . Overview of wiring diagram. I Universal mounting bracket (OEM mounts available for online orders). 4 Connection points from wiring harness.
Reversing camera connection to reversing bulb. Factory mount above, SmartNav 5 OEM replacement mount below. Chapter three (3) installation of parts: Install mount on back of SmartNav with screws provided 6 Attach mount according to what mount you are using. If you are using preexisting anchor and OEM mount as in picture (BMW), use same process but in reverse of the factory mirror and mount you removed.
Tuck wire from SmartNav 5 into headliner. It only has to go in just a little to stay in place. Remove weather stripping and run wire harness behind it. As you come down the pillar, tuck weather stripping back into place pressing firm ly. You may need to use a plastic wedge tool to force back behind dash. Route to which ever pillar A or B will get you to your power source. In this case it was B pillar the passenger side.
Guide your wire harness to your power source, in this case the fuse box. You can buy fuse extenders and attached power leads right to fuse (pick non critical fuse such as interior lights, never modules or fuel pump). Use a volt meter to find your constant power source (red cable batt+) which means this fuse always has 12 volts running through it even with ignition off. Attach to fuse. Next find your ground source, (black wire) you may have to extend your black ground wire to find suitable location.
If you have purchased the optional Parking Sensors along with your SmartNav 5. You would have received the installation manual with the sensors. Below is a quick layout of the additional wiring needed to help you start the Parking Sensors installation process. (Refer to manual included with the parking sensors packaging). Next run the rear camera wire feed to back of vehicle along the floor board t rim then under rear seat. Mount your camera in desired location.
Overview of SmartNav 5 layout Fifth button from left: Thi s button is also used in DVR mode, it has two functions. One it will cycle through footage while you are In playback mode (Fourth button). Two, you can mute the interior cab recording. Backside o[SmartNav 5 Mount ~nd Auxlhary pO
How to use and personalize your SmartNav 5 Theme display screen Theme icon located on main display. Click on the Theme icon pictured above. This will take you into Theme settings where you can change the number of icons displayed on the main interface. SmartNav 5 is setup to mimic the standard Interface of most smart-phones. Just like most Smart- phones It may take a day or t wo to become familiar with all the applications that come with the system.
Main screen with 6 icons show Main Screen icon description Main screen with 3 icons show The white and blue dot pict ured in the right hand corner of your screen represent SmartNav S's two display screens. You can go back and forth between the two screens just by swiping your finger across the screen to access the second screen . r!:J The Radio icon is a shortcut to access your FM transmitter, by tapping t his icon it will take you to t he FM transmitter display screen.
Main screen with "All" icons shown Icon Themes can be changes as well By selecting Icon Theme settings you can select 1 of the 5 different choices for your icon themes. Hit the save icon highlighted in red to save after your selection. When "All" style is choosen under theme settings an extra 4 icons appear. Laungauge, System, Snake and Gobang. You will need to use the "All" style choice to find and and change your language preference.
How to use your GPS navigation Tap the navigation Quick reference guide to iGO than tap Find Once you have opened your GPS navigation icon, it will take you to SmartNav S's Drive application. From here simply touch the button on the display labeled iGO Primo Navigation. Once pressed It will take you st raight to iGO Primo. My Route iGO Primo is a fully featured GPS navigational software developed specifically for the SmartNav 5.
My Route How to use your Bluetooth 4.0 will The yellow squared icon take you to the route options such as canceling route, upcoming traffic and detour options. Tap the Bluetooth I- icon~ to start the setup of your smart-phone or standard Bluetooth device. ) More... will The purple squared icon take you to a host of icons which will give you access to any media stored on your device like Music or pictures, along with every unit conversion from pants size to measuring tables.
Tap the phone book icon Tap the green arrows icon search. to access ~to start phone After device is found highlight by tapping it once and tap the Bluetoot h check t he pairing process. icon ~ to start Tap the green arrows icon to dowload yourphonebook Your cell phone should ask for the 4 digit pin code which is "0000", enter those numbers to allow t he pairing to finish.
from phone book Tap the green phone icon after a name has been highlighted to place call. Tap the Keypad icon L..:~.&...~ to access keypad to dial by number. Tap the Dial Record icon record. Calls press the ~ to accept Press ~to decline. To transfer from cell phone press the 28 GxI to enter dial Press the settings icon on main Bluetooth screen to access the Bluetooth settings. icon.
Press the keyboard icon :::tfj to change pin code or device name that registers on your cell phone. Select Music icon to access your smartphones Music library. You can play, pause, reverse and forward your selected music. JTOPND Select "Biuetooth start automatically icon" to allow for immediate pairing of your cell phone open vehicle St artup.
is not The internet explorer or "dun List" yet available on all SmartNav 5's. Please contact App-Tronics at info@app-tronics.com to see if an update has been issued. Whenever an active call comes in and you want to return to the previous display screen like iGO Primo navigation, simply press the power button The SmartNav 5 Drive application is meant to be used when driving your vehicle. It gives you access to all you need in a safe and proper manner.
This color code d breakdown w ill show what the top bar on the Drive Application m eans t o the drive r. The RF Disconnected or Connect highlighted in Red Every SmartNav 5 comes with its own red light camera and speed trap database. You can add to this database under several titles such as mobile speed camera, black ice, fixed pole camera and many more. If you come along one of these points of interest (poi's) and it's not current in our database.
These tables will explain how to use and change your settings in the Drive Application, as well as the use of the optional Upgrade Stealth systems radar detector and laser diffusers , I Setttng ) ' The Settings tab highlighted in Red. Will take you to the Drive Applications settings interface for the optional Stealth Interceptor 2300is radar detector and laser diffusers.
Preview Preview --Speed of Silence OMPH When car speed is smaUar !han lhe value, the alarm does not prompt Add the speed value Sub lhe speed value Navi A Navi B Paths ~" - -- Navi: B" lt::ll Select A as current executed navi program, Navi A will display on title bar. Select B as current executed navi program, Navi A will display on ti tic bar. Specify the path of ga_t_io_J_l_A__a_nd__B________~ r-------+- ~ ~_n_a_v_i= Volume disercasc Volume Volume increase Tap the Magnifying Glass li.
Stealth Interceptor 23 00is Upgrade Kit (Optional) If you have purchased the Stealth Interceptor 2300is radar detector and laser diffusers Upgrade Kit, please follow the manual that came with the kit for installation. The SmartNav 5 will automatically connect with the front bumper mounted radar detector and laser diffusers moments after your car is started.
Tap the Music Player icon below Music I nterface. to enter the 0 ® Pause Pause the music being played. Stop Stop the music being played. Set play Select sequence, random or sequence cycle play. Previous Play the previous music. Next Play the next music. Volume Drag it leftward to turn down or rightward to turn up the volume. Progress ~ Drag it leftward or rightward to play from a previOus or future moment. Icon [g Name Enter to download and create playlist. Time Display the run time.
The Movie Player, Flash Player and RMVB Player icons can all be tapped once to enter the selected Player Interface. Explanation Name Close Close the Music List Scroll Drag it upward/ downward to Vtew bar all music. Add one Add a piece of music on the left bst to the play list on the righl. Add all Add all the music on the left list to Icon Name Close Previous Close the video player. Play the previous film. film Play Continue playing the the play list on the righl.
Name Icon Ii I Progress Drag the sliding block leftward to play fi·om a Previous moment or rightward for a coming Moment. Drag it leftward to turn I il Volume [g ~ :: ; Explanation Close Close the video folder. Scroll bar D1·ag the sliding block upward / downward to view all the files inside the folder. Film name& tormat Film name and its format down or rightward to tum up the volume. !1181!181.11111181.111!11 Time Display the play time and the mus ic duration.
Icon The Story of Us.txt. Explanation Name File name & Current file name and format format. Close Close the reader. Scroll bar Drag the sliding block upward / downward to Tap the Paint Board icon Reader settings shown below. to enter the eBook view all content of the e-book. ~ ij Folder Enter the e-book folder to select an e-book to read. Previous Read the previous page. Next Read the next page. Setting Select a text theme, font, word size and bold type.
To create a book mark, locate the page by tapping up or down or dragging the scroll bar on the right side of the interface. The Bookmark icon will highlight once you have highlighted the text by dragging your finger across the selected text Tap the icon, than lap OK 10 finish. Tap the Bookmark icon Bookmark List seen below. Icon m ~ Name created bookmarks in the Explanation Close Close current folder. Return Return to the previous fo lder.
When using the FM transmitter test as many stations as possible to find t he best available reception. It doesn't Tap t he wallpaper icon 1 SmartNav 5 wallpaper. to allow changing of your have to be a "dead air" station for SmartNav S's t ransmitter to broadcast to your radio station selected. All SmartNav S's come with an auxiliary port located on t he back of the To set your wallpaper simply double tap the wallpaper mirror.
Tap the GPS Viewer icon to enter the GPS reset imcrface. Tap Navi Configuration icon to alter what navigation software wi ll be used when you tap the navigation icon . ~ Notc:Currcntly all Smart a' s·sna' igation configuration or pathway is set for ""cdog·· which is the ··Drive Application ... From there you access your iGO Primo by tapping " iGO Primo Na,~gation 1G0Pnmo Navtga11on ' lf you wish to bypass the dri,·c application. you may do so by selecting iGO or Mobile a' igator"s exe.
Tap the Photo Viewer icon SD stored photos. to access your Micro t o enter the stored photos on Tap the Open File icon the Micro SD card. (Note: You can double tap the viewable photo once opened to cover the entire 5 inch display, double tap to return to bottom tool bar). View the preview photo in the folder. View the next photo in the folder. Scale up current photo. Scale down current photo. Rotate current photo 90°clockwise. Cycle play all the photos in the folder from current photo.
0 0 Tap the Volume icon to adjust the volume settings of your SmartNav 5. Tap the Backlight icon to change the brightness and delayed brightness settings of the SmartNav 5 display screen. Exit the backlight setting. [ ) i Close Exit the volume setting. Volmne Ten volume grades (from [ • ) Back· light mute to maximum) available. Tap to decrease the voltune by grade. ~ ~ '''I• , ,.1 ~ < ' •r or rightward to turn up the backlight.
Tap the Language icon ~~ to change the interfaces language settings to the appropriate user or area. Tap the Date/Time icon ~ to adjust the SmartNav S's date, time and regional location. Setting the System date and time of your SmartNa v 5 ...._. to select a system language, tap the Save icon ~ to save your selection. SmartNav 5 comes with over 30 languages, The text to speech software that comes with iGO navigation has just as many.
Insert the Micro SO card provided into the computer and double click the AOR icon. mJ The below interface will appear. You can replay video from the SO card, delete locked files or save and share them from your computer. Go to App-Tronics.com for video demo on how to use your AOR player further. SmartNav 5 front viewing DVR camera All SmartNav 5's come with a front viewing DVR camera. This chapter will rev iew and show how to best utilize the forward thinking behind the technology.
The Micro SO card that comes with th e SmartNav 5 in the DVR slot, does not come preformatted. To maximize the recording time you must format the card from your home PC. If you are unfamiliar with how to format a SD card visit App-tronics.com and go to the download page to learn how to do so. It's a very easy quick process. SmartNav 5 will ask you to reformat that card to its operating system when reinserted, click yes. You will than maximize your recording time.
NTSC Notes when using or inserting Micro SD card: Setthe format of TV out TV Out PAl 1. Do not take out the Micro SD card while you are using any of the stored media on SmartNav S's applications. Example: If you are running video feed from the Micro SD through the Video Player, do not remove the SD card till you power down the video player. 2. To avoid damaging your Micro SD card do not exert heavy pressure or bend it while inserting and removing the card. 3.
Featured Specifications of the SmartNav 5 GPSnavigation Wm CE 6.0 ()p
Trouble Shooting SmartNav 5 is a computer, please allow its Ul a nd operati ng system to properly adjus t to its installation. If you r un into any ofth e below errors, it is typically from user error a nd just like a new smart -phone, the owner must become acquainted with the system. Check out the de mo videos online to better assist in learning a ll Smar tN av 5 can do for you. Not e nough voltage comi ng h"'m power For period of one year from the date of first consumer purchn.ao. App. Tronics.
This warranty card must be filled out and returned to AppTronics to receive the automatic extended warranty when installed by an Authorized Dealer. Warranty matches cars factory warranty up to Syears, cars with under receive a max 3 year extended warranty. If installed by anyone other then an Authorized Dealer, the standard one year warranty takes place. Please scan and email this card to info@app-tronics.com, or mail to1605 Commodore Cove Painesville Ohio 44077.
Car Rear View Camera Instruction • Car Rearview/Reverse/Backup camera • Color CMOS/CCD,PAL/NTSC • High Definition and Wide Viewing Angles • Waterproof and Night vison 1. Wire connection Our cameras are applicable to all types of vehicles, and with three main typesunlversal,special,and wireless .They should be Installed at proper position and used with car DVD player, monitor, GPS, parking sensor, etc. 2. Installation 2.1.Universal and special rearview camera 2.1.
2.2 Wireless rearview camera It Is composition of wireless system (transmitter and receiver) and any model of the universal or special rearview camera 2.2.1 Connection Transmltte...DC and AV jack connect with camera's DC and AV socket,the thin · wire end connect with reversing power Receiver: DVD kind: The thin wire end connect with reversing power while AV jack conect with car DVD,monltor and other display devlces.
