User Manual User guide

EN-29
Changing OSD Language
To change the on-screen display (OSD) language, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > Multiple Language.
4. Select the desired language and tap Apply to save the settings.
Resetting to Default
To restore all parameters to the default settings, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > Reset to Default.
4. A confirmation message appears on the screen. Tap OK to reset the device.
Changing Administrator Password
To set or change the user name and password, perform the following:
1. On your mobile device, launch Wi-Backup APP.
2. Tap Settings tab.
3. Tap Device Setting > Admin. Password.
4. The Password Setup page appears. Configure the following options:
 New User Name: Enter the new user name.
 New Password: Enter the new password.
 Confirmed Password: Reenter the new password.
5. Tap Apply to save the settings.