Operation Manual

aponorm
®
Basis Control
aponorm
®
Basis Control – Brief instructions
Insert the batteries supplied along
with the monitor.
The cuff must come to sit approx.
2 cm above your arm bend. Extend
your arm so that the cuff is at the
same height as your heart.
Switch the monitor off. The
measurements are stored
automatically.
Connect the cuff.
Start the measurement by pressing
the Start/Stop button.
Do not talk, move, eat drink or
smoke during the measurement.
Relax for a few minutes before
each measurement.
After the measurement the blood
pressure values measured appear
on the display.
1
4
8
2
5 6
3
7
2