User`s manual

Chapter 6 BIOS Configuration
TI6VGA User’s Manual 39
6.6 Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively. It will shut down the hard disk and turn off video display after
a period of inactivity.
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI Function : Enabled Primary INTR : ON
Power Management : User Define IRQ3 (COM2) : Primary
PM Control by APM : Yes IRQ4 (COM1) : Primary
Video Off Option : Suspend -> Off IRQ5 (LPT 2) : Primary
Video Off Method : V/H SYNC +Blank IRQ6 (Floppy Disk) : Primary
Soft-Off by PWRBTN : Instant-Off IRQ7 (LPT 1) : Primary
** PM Timers ** IRQ8 (RTC Alarm) : Disabled
HDD Power Down : Disabled IRQ9 (IRQ2 Redir) : Secondary
Doze Mode : Disabled IRQ10 (Reserved) : Secondary
Suspend Mode : Disabled IRQ11 (Reserved) : Secondary
** PM Events ** IRQ12 (PS/2 Mouse) : Primary
VGA : OFF IRQ13 (Coprocessor) : Primary
LPT & COM : LPT / COM IRQ14 (Hard Disk) : Primary
HDD & FDD : ON IRQ15 (Reserved) : Primary
DMA / master : OFF ESC : Quit
Ç È Æ Å
: Select Item
F1 : Help PU/PD/+/- : Modify
Modem Ring Resume : Disabled F5 : Old Values (Shift) F2 : Color
RTC Alarm Resume : Disabled F6 : Load BIOS Defaults
F7 : Load Setup Defaults
ACPI Function
This field allows you to enabled or disable the ACPI function on the
motherboard. By default, this field is set to
Disabled
.
Power Management
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges are from 1 min. to
1hr. Except for HDD Power Down
which ranges from 1 min. to 15 min.
(Default)
NOTE
:
In order to enable the CPU overheat protection feature, the
Power Management field should not be set to Disabled.