User`s manual

Chapter 5 Installation

TI6VGA User’s Manual

ATX Power ON Switch: Pins 7 and 17

This 2-pin connector is an “ATX Power Supply On/Off

Switch” on the motherboard that connects to the power

switch on the case. When pressed, the power switch will

force the motherboard to power on. When pressed again, it

will force the motherboard to power off.

Turbo LED Connector: Pins 8 and 18

There is no turbo/deturbo function on the motherboard. The

Turbo LED on the control panel will always be On when

attached to this connector.

Pin # Signal Name

8 5V

18 Ground

Reset Switch: Pins 9 and 19

The reset switch allows the user to reset the system without

turning the main power switch off and then on again.

Orientation is not required when making a connection to this

header.

Hard Disk Drive LED Connector: Pins 10 and 20

This connector connects to the hard drive activity LED on

control panel. This LED will flash when the HDD is being

accessed.

Pin # Signal Name

10 HDD LED

20 5V