User`s manual

Chapter 5 Installation
22 TI6VGA User’s Manual
5.11 J12: IrDA Connector
This connector is used for an IrDA connector that supports infrared
wireless communication.
Pin # Signal Name
1 +5V
2 No connect
3 Ir RX
4 Ground
+5V IRRX IRTX
N.C. GND
5 Ir TX
5.12 USB1: USB Connector
USB1 is the standard USB external connector consisting of two ports.
USB support allows connections of up to 64 plug and play external
peripherals per channel. The following table shows the pin outs of these
ports.
Pin # Signal Name
1 Vcc
2 USB-
3 USB+
4 Ground
Port 1
Port 2
5.13 J17: Wake on LAN Connector
J17 is a 3-pin header for the Wake on LAN function on the motherboard.
The following table shows the pin out assignments of this connector.
Wake on LAN will function properly only with an ATX power supply
with 5VSB that has 200mA.
Pin # Signal Name
1 +5VSB
2 Ground
1 2 3
3 Wake on LAN