User`s manual

Chapter 3 Hardware Description
6 TI6VGA User’s Manual
3.1 Processor
The TI6VGA motherboard is designed to take an Intel Pentium II
processor running 233/266/300/333/350/400/450MHz or an Intel
Celeron processor running 266/300/333MHz with its Slot 1 processor
connector.
3.2 L2 Cache
The L2 cache is integrated in the Pentium II processor.
3.3 Main Memory
The TI6VGA motherboard supports three 168-pin DIMM (Dual In-line
Memory Module) sockets to form a memory configuration from 8MB to
384MB.
It can also come with two DIMM sockets and 64MB SDRAM
on board.
DIMM modules can be 8MB, 16MB, 32MB, 64M and128MB
in SDRAM. In populating the DIMM sockets, any socket can be
populated first. Refer to the following table on how to do the memory
configuration.
NOTE
: Use SDRAM modules with PC100 specification when running
100MHz CPU bus speed. With 66MHz CPU bus speed, SDRAM
modules with PC66 or PC100 specification can be used.
(DIMM1) (DIMM2) (DIMM3) Total Memory
8MB ----- ----- 8MB
16MB ----- ----- 16MB
32MB ----- ----- 32MB
64MB ----- ----- 64MB
128MB ----- ----- 128MB
8MB 8MB ----- 16MB
16MB 8MB ----- 24MB
32MB 8MB ----- 40MB
64MB 8MB ----- 72MB
128MB 8MB ----- 136MB
8MB 8MB 8MB 24MB
16MB 8MB 8MB 32MB
32MB 8MB 8MB 48MB
64MB 8MB 8MB 80MB
128MB 8MB 8MB 144MB
16MB 16MB ----- 32MB
32MB 16MB ----- 48MB