Installation manual

Introduction
4 Apollo MX20 Installation Manual
"The conditions and tests required for TSO/JTSO approval of this article are minimum performance
standards. It is the responsibility of those installing this article either on or within a specific type or class
of aircraft to determine that the aircraft installation conditions are within the TSO/JTSO standards. The
article may be installed only if the installation is performed in accordance with Part 43 or the applicable
airworthiness requirements.”
1.4 UNPACKING THE EQUIPMENT
Carefully unpack the equipment. Visually inspect the package contents for any evidence of shipping
damage. Retain all shipping containers and packaging material in case reshipment is necessary.
1.5 PACKAGE CONTENTS
As shipped from the UPS Aviation Technologies factory, the MX20 Installation package includes
most necessary items for installation other than supplies normally available at the installation shop.
The items included in the package are listed in Table 1.