Installation manual

Introduction
8 Apollo GX50/60/65 Installation Manual
OTHER REQUIRED MATERIALS
The GX50/60/65 is intended for use with standard aviation accessories. External devices
required for various installations are listed in the System Configurations section on page 4.
Depending upon the installation, this will include items such as:
• annunciators
• a CDI or HSI
• a comm antenna
• a microphone(s)
• a speaker or headphones
SPECIAL TOOLS REQUIRED
Crimp Tool
A crimp tool meeting MIL specification M22520/1-01 and a positioner are required to ensure
consistent, reliable crimp contact connections for the rear 15 and 37 pin d-sub connectors.
These tools are available from:
Astro Tool Corp. Phone [phone]
21615 SW TV Highway Fax [phone]
Beaverton, OR 97006
Crimp tool: Astro Tool part #615708
Positioner: Astro Tool part #616356
LICENSE REQUIREMENTS
An aircraft radio station license is required for operation of the GX60/65 comm transmitter
once installed in the aircraft. An application must be submitted on FCC Form 404, which may
be obtained from the FCC in Washington, DC, or any of its field offices. Procedures for
applications are in CFR 47, Part 87, Aviation Services, Subpart B, Applications and Licenses.