Installation Guide
Customer Service: 1.888.229.2874 www.apolloow.com 9
PEX QUICK PINCH CLAMP TOOL
HOW TO USE
Quick Pinch Clamp Tool
69PTKG1096
1. Cut PEX tubing square, leaving a clean, even
edge. Remove any burrs.
2. Slip PEX pinch clamp over tubing and insert
tting. Place pinch clamp 1/8” below edge
of tubing.
3. Place PEX pinch clamp nub between tool
jaws and ratchet the clamp until the PEX
Pinch Clamp Tool auto-releases. This action
will assure that the PEX pinch clamp is fully
engaged.
4. Pressure test the PEX tubing and inspect
before burying or normal use. If there are
any signs of leaks, repeat the total
procedure.
For use with Apollo, Watts
®
, Murray
®
, and Oetiker
®
PEX cinch clamps.
Do not use with Zurn
®
Qickclamp
™
PEX crimp rings.
Apollo PEX Pinch Clamps
PXPC3810PK 3/8" 10 Pack
PXPC1210PK 1/2" 10 Pack
PXPC1225PK 1/2" 25 Pack
PXPC12100PK 1/2" 100 Pack
PXPC3410PK 3/4" 10 Pack
PXPC3425PK 3/4" 25 Pack
PXPC34100PK 3/4" 100 Pack
PXPC15PK 1" 5 Pack
PXPC110PK 1" 10 Pack