Tus neeg siv phau ntawv

IG22.02 DS 43-98 22.06.16

Page 11

6. Installing the TV to the Back Panel

IMPORTANT: Test operation of your TV before attaching front cover.

e. Attach cable cover, securely tighten into threaded inserts, and

neatly dress all cables using wire cable management covers on

mounts, and wire ties, as necessary.

NOTE: For best results, position cables flat against rear panel.

a. Lift TV and align swing bolts (located on top of TV hanger brackets) above hanger hooks on top of

rear panel and carefully lower into place.

b. Check side to side alignment to be sure TV is centered left to right.

c. Swing bottom of TV outward; plug TV into 3 outlet A/C power receptacle on rear panel and make

appropriate signal connections.

d. To lock TV in place, pull latch cord down, push TV toward bracket and release. Be sure all cables

are clear from interfering with TV swing brackets.