Installation Guide

OVERVIEW
Brass Push To Connect Fittings
Tectite by Apollo Push-To-Connect fittings are the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and
PEX pipe without the use of tools, solder, open flame or glue.
Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring.
Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for
simpler installation in tight spaces.
All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
Features:
• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Corrosion resistant for greater longevity
• Lifetime warranty on most fittings. Refer to Apollo Warranty on www.apolloflow.com for item specific information.
Specifications:
• Maximum Working Pressure: 200 psi
• Temperature Range: 32º-250º F
• Approved for behind-the-wall with no access and burial
• Ideal for potable water and hydronic heating applications
Push Fittings
How to connect:
1. Cut pipe.
How to disconnect:
The use of pipe inserts for plastic pipe connections with Apollo Push Fittings is recommended in standard residential plumbing (hot and cold water)
installations. Pipe inserts are included with all Apollo Push Fittings.
The use of pipe inserts for plastic pipe connections with Apollo Push Fittings is required in all heating installations. Pipe inserts are included with all Apollo Push
Fittings.
1.125"
Header
BACK - 6"
FRONT - 6"
1.125"
Header
FOLD
3.375"
SIDE
SEAL
SIDE
SEAL
ZIPPER ZIPPER
.375” from top
.25" Hanger hole:
centered
1002-429-570
023
Push To Connect Fitting
1/2" x 1/2"
Straight Coupling
by
Use with Copper, CPVC,
PE-RT, or PEX
FAST • CLEAN • SIMPLE • FOREVER
Lifetime Warranty
www.apolloflow.com
Conbraco Industries, Inc.
Matthews, NC USA 28105
1.888.229.2874
Made in UK
• Removeable
• Reusable
• Install Wet Or Dry
Removal
Tube liners (included) are required to join PEX tubing.
LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25%
lead by weighted average.
Warning: This product contains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm.
Failure to follow instructions will void the warranty, and possibly result in leaks and
water damage.
Max. Pressure:
200 psi
Temperature Range:
32º-250º F
ASSE 1061
IGC 188
NSF-61
Installation
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
FSBC12
1
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
35800
16 www.apolloflow.com Customer Service: 1.888.229.2874
PUSH TO CONNECT FITTINGS
2. Mark the
insertion
depth using the
depth gauge
(sold separately).
1.125"
Header
BACK - 6"
FRONT - 6"
1.125"
Header
FOLD
3.375"
SIDE
SEAL
SIDE
SEAL
ZIPPER ZIPPER
.375” from top
.25" Hanger hole:
centered
1002-429-570
023
Push To Connect Fitting
1/2" x 1/2"
Straight Coupling
by
Use with Copper, CPVC,
PE-RT, or PEX
FAST • CLEAN • SIMPLE • FOREVER
Lifetime Warranty
www.apolloflow.com
Conbraco Industries, Inc.
Matthews, NC USA 28105
1.888.229.2874
Made in UK
• Removeable
• Reusable
• Install Wet Or Dry
Removal
Tube liners (included) are required to join PEX tubing.
LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25%
lead by weighted average.
Warning: This product contains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm.
Failure to follow instructions will void the warranty, and possibly result in leaks and
water damage.
Max. Pressure:
200 psi
Temperature Range:
32º-250º F
ASSE 1061
IGC 188
NSF-61
Installation
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
FSBC12
1
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
35800
3. Push pipe (A) and twist
(B) into fitting until fitting
edge meets insertion line.
1.125"
Header
BACK - 6"
FRONT - 6"
1.125"
Header
FOLD
3.375"
SIDE
SEAL
SIDE
SEAL
ZIPPER ZIPPER
.375” from top
.25" Hanger hole:
centered
1002-429-570
023
Push To Connect Fitting
1/2" x 1/2"
Straight Coupling
by
Use with Copper, CPVC,
PE-RT, or PEX
FAST • CLEAN • SIMPLE • FOREVER
Lifetime Warranty
www.apolloflow.com
Conbraco Industries, Inc.
Matthews, NC USA 28105
1.888.229.2874
Made in UK
• Removeable
• Reusable
• Install Wet Or Dry
Removal
Tube liners (included) are required to join PEX tubing.
LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25%
lead by weighted average.
Warning: This product contains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm.
Failure to follow instructions will void the warranty, and possibly result in leaks and
water damage.
Max. Pressure:
200 psi
Temperature Range:
32º-250º F
ASSE 1061
IGC 188
NSF-61
Installation
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
FSBC12
1
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
35800
1. Removal tool (sold separately).
1.125"
Header
BACK - 6"
FRONT - 6"
1.125"
Header
FOLD
3.375"
SIDE
SEAL
SIDE
SEAL
ZIPPER ZIPPER
.375” from top
.25" Hanger hole:
centered
1002-429-570
023
Push To Connect Fitting
1/2" x 1/2"
Straight Coupling
by
Use with Copper, CPVC,
PE-RT, or PEX
FAST • CLEAN • SIMPLE • FOREVER
Lifetime Warranty
www.apolloflow.com
Conbraco Industries, Inc.
Matthews, NC USA 28105
1.888.229.2874
Made in UK
• Removeable
• Reusable
• Install Wet Or Dry
Removal
Tube liners (included) are required to join PEX tubing.
LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25%
lead by weighted average.
Warning: This product contains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm.
Failure to follow instructions will void the warranty, and possibly result in leaks and
water damage.
Max. Pressure:
200 psi
Temperature Range:
32º-250º F
ASSE 1061
IGC 188
NSF-61
Installation
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
FSBC12
1
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
35800
2. Place tool around pipe
next to fitting. Press tool
toward fitting while
pulling pipe from fitting.
1.125"
Header
BACK - 6"
FRONT - 6"
1.125"
Header
FOLD
3.375"
SIDE
SEAL
SIDE
SEAL
ZIPPER ZIPPER
.375” from top
.25" Hanger hole:
centered
1002-429-570
023
Push To Connect Fitting
1/2" x 1/2"
Straight Coupling
by
Use with Copper, CPVC,
PE-RT, or PEX
FAST • CLEAN • SIMPLE • FOREVER
Lifetime Warranty
www.apolloflow.com
Conbraco Industries, Inc.
Matthews, NC USA 28105
1.888.229.2874
Made in UK
• Removeable
• Reusable
• Install Wet Or Dry
Removal
Tube liners (included) are required to join PEX tubing.
LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25%
lead by weighted average.
Warning: This product contains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm.
Failure to follow instructions will void the warranty, and possibly result in leaks and
water damage.
Max. Pressure:
200 psi
Temperature Range:
32º-250º F
ASSE 1061
IGC 188
NSF-61
Installation
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
FSBC12
1
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
35800
Approvals:
• NSF 61
• ASSE1061
• IAPMO
• Meets UPC, IPC, and cUPC standard requirements