Specifications

Operation
23
Open the waste gas/overflow valve, until the operating
pressure at the pressure gauge will be achieved.
Subsequently, close the valve again.
Do not direct the opening of the waste gas/overflow
valve towards any persons or devices, as cryogenic
gas causes burns and brittleness.
When putting the vessel out of operation, it has to be
completely emptied out, warmed up and stored under slight
gas overpressure, in order to avoid condensation of humidity.
Note !
The operating instructions
• are firmly attached to the outer vessel.
5.7 Pressure Relief
5.8 Putting out of Operation
5.9 Operating Instructions