Product Overview

AE Actuator

General

Specifications

Actuator Breakaway Torque Cycle Time Duty Cycle Amperage Draw (max.)

Model Output

(in.-lbs.) 90˚ Travel Starting or locked rotor current voltage

(50% Load) 115 VAC 230 VAC 12 VDC 24 VDC

AE200 200 in-lbs 5.0 sec. 25% .74 amp .44 amp 1.6 amp 1.7 amp

AE400 400 in-lbs 10.0 sec. 25% .74 amp .44 amp 1.6 amp 1.7 amp

AE600 600 in-lbs 15.0 sec. 25% .74 amp .44 amp 1.6 amp 1.7 amp

AE800 800 in-lbs 20.0 sec. 25% .74 amp .44 amp 1.6 amp 1.7 amp

AE1000 1000 in-lbs 25.0 sec 25% .74 amp .44 amp 1.6 amp 1.7 amp

Note: 90˚ Travel = Travel From Closed position to Open position or vice versa.

DC current draw is at max. torque

24 VAC current draw at locked rotor 4.6 amp

Motor AC models: 120 VAC or 230 VAC, Reversible 3 wire, capacitor run. Self-resetting

(thermal) overload protection, Class B insulation, sub-fractional horsepower.

DC models: 12 VDC or 24 VDC, Reversible 2 wire, POS & NEG. No thermal overload

(external circuit breaker or fuse suggested for protection.)

Lubrication Permanently lubricated gear train and bearings

Duty Cycle The AE-Series actuators are designed to operate at 25% duty cycle at temperatures

below 100˚F.

See Electrical Operation.

(24 AC-20% duty cycle below 100˚F)

Temperature Operating 32˚F to 150˚F Max

Range -40˚F to 150˚F with optional heater & thermostat

Thermal Protection Self-resetting (AC Motors Only)

Conduit Connections (2) 1/2”-NPT female

Direction Of Travel Clockwise to Close, Counterclockwise to Open (Position indicator shaft only, manual

override shaft rotates opposite)

AE Dimensions

Actuators and Controls