Brochure

For additional information, submittal sheets and manuals, visit www.apollovalves.com
APOLLO VALVES Customer Service [phone]
64
www.apollovalves.com
INSTALLATION & PRESSING INSTRUCTIONS
Insert the tube into the tting or valve
with twisting motion until it meets tube
stop AND insertion depth mark. Wetting
the tube, tting or valve with clean water
may reduce insertion force.
Using approved press tool and jaw of
the correct size, open the jaw and place
over the bead of the tting or valve at a
90 degree angle to the tube centerline.
Press. Please refer to the specic tool
manufacturer instruction.
1
2
Jaw Pressing Instruction
Typically for ½” Through 2” Sizes
3
Insert the tube into the tting or valve
with twisting motion until it meets tube
stop AND insertion depth mark. Wetting
the tube, tting or valve with clean water
may reduce insertion force.
Using approved press tool and ring,
sling, chain of the correct size, open
the ring, sling or chain and place over
the bead of the tting or valve at a 90
degree angle to the tube centerline.
Press. Please refer to the specic tool
manufacturer instruction.
1
2
3
Ring, Sling, Chain Pressing Instruction
Typically for 2 ½” Through 4” Sizes