Brochure

For additional information, submittal sheets and manuals, visit www.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service [phone]
www.elkhartproducts.com
63
Cut the tube square using a rotary
tube cutter or ne toothed steel saw.
Remov
e internal and external burrs at tube ends using nd tooth le or commercially
available de-burring tools.
1
2
PRESSING INSTRUCTIONS
TOOLS
APOLLOXPRESS® products are tested and approved for use with multiple tool manufacturers. Please see our “Jaw Compatibility” on page 65 for
specic approvals. Like other tools and equipment pressing tools and their accessories require servicing. Please follow tool manufacturer instruction.
Mark insertion depth by inserting
tube into the tting or valve with
twisting motion until it meets tube
stop OR tape measure and insertion
depth chart.
4
Nominal Pipe Size
1/2”
3/4”
1”
1 ¼”
1 ½”
2”
2 ½”
3”
4”
Insertion Depth (in)
3/4” (0.75”)
15/16” (0.94”)
15/16” (0.94”)
1-1/16” (1.06”)
1-7/16” (1.44”)
1-9/16” (1.56”)
1-7/8” (1.9”)
2-1/8” (2.1”)
2-1/2” (2.5”)
Inspect tting or valve to insure bead
O-ring is present, un-damaged and free
from dirt and debris.
3
Pressing Instructions