American Made Quality you can Depend On. Mechanical Leak Before Press® on small diameter, within a 120 degree turn. Deepest cup depth on the market. Short turn elbows for space saving alternatives. Radial orientation on installation is not necessary on the APOLLOXPRESS® line. VISUAL and Mechanical Leak Before Press® feature on our large diameter fittings. Patented stainless steel grab ring on large diameter 21/2” - 4” Unique Floating flanges can be put back in place during installation.
TABLE OF CONTENTS About APOLLOXPRESS®................................................................................... 4-5 Ball Valves...........................................................................................................7 Gate, Globe, Checks and Strainers.....................................................................15 Water Pressure Reducing Valves........................................................................29 Balancing Valves.........................................
www.apollovalves.com APOLLO VALVES Customer Service (704) 841-6000 For additional information, submittal sheets and manuals, visit www.apollovalves.
Contractor quality press ball valves in sizes ½” - 4” feature full port design, forged brass or cast bronze bodies and numerous handle and trim options. Standard construction for HVAC or certified Lead Free for potable water, all feature press connections incorporating Leak Before Press® technology.
77V SERIES Press End Forged Ball Valve DESCRIPTION: The APOLLOXPRESS® 77V Series two-piece press ball valve is ideal for installation in heating, cooling and non-potable plumbing. Features Leak Before Press® technology and 250 psig maximum working pressure. Proudly Made in the USA.
77VLF SERIES Lead Free Press End Forged Ball Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® 77VLF Series press ball valve is ideal for installation in most plumbing and heating systems, including potable water. Features Leak Before Press® technology and 250 psig maximum working pressure.
77W SERIES Press End Bronze Ball Valve DESCRIPTION: The APOLLOXPRESS® 77W Series Ball valve is ideal for installation in heating, cooling and non-potable plumbing. Features Leak Before Press® technology and 250 psig maximum working pressure.
77WLF SERIES Lead Free Press End Bronze Ball Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® 77WLF ball valve is ideal for installation in most plumbing and heating systems, including potable water systems requiring NSF 61 or Lead Free* approval. Features Leak Before Press® technology and 250 psig maximum working pressure.
77W-HC SERIES Ball Valve w/Press X Hose Connection DESCRIPTION: The APOLLOXPRESS® 77W-HC Press x Hose bronze ball valve is ideal for installation in heating, cooling and non-potable plumbing. Features a ¾” hose thread connection with heavy brass cap to protect the threads. Features Leak Before Press® technology and 250 psig maximum working pressure.
77WLF-HC SERIES Lead Free Ball Valve w/Press X Hose Connection DESCRIPTION: The APOLLOXPRESS® Lead Free* Press x Hose Cap & Chain bronze ball valves feature a ¾” hose connection with heavy brass cap to protect the threads. The 77WLF-HC is ideal for most plumbing and heating systems, including potable water. Features Leak Before Press® technology and 250 psig maximum working pressure.
www.apollovalves.com APOLLO VALVES Customer Service (704) 841-6000 For additional information, submittal sheets and manuals, visit www.apollovalves.
For additional information, submittal sheets and manuals, visit www.elkhartproducts.com Cast bronze 200 CWP gate, globe, and swing check valves, in press sizes ½” to 2”, feature materials and workmanship that conform to MSS-SP80. Rising and non-rising stem models feature solid bronze wedge disc gates, and bronze or PTFE seated globes and checks. Also available are bronze wye strainers and in-line check valves with RPTFE Ball Cone® seating. Press connections incorporate Leak Before Press® technology.
101T-PR 200 CWP Bronze RS Gate Valve DESCRIPTION: The APOLLOXPRESS® Model 101T-PR (30 Series) Gate valve with Press connections is a proven combination that provides economical installation and reliable service. The valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials. The Apollo rising stem Gate valve can reliably be installed in most heating, cooling and non-potable plumbing systems including building service piping and OEM applications.
101T-PRLF Lead Free 200 CWP Bronze RS Gate Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® Model 101T-PRLF (30LF Series) Gate valve with press connectors is a proven combination that provides economical installation and reliable service for plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
102T-PR 200 CWP Bronze NRS Gate Valve DESCRIPTION: The APOLLOXPRESS® Model 102T-PR (30 Series) Gate valve with press connections is a proven combination that provides economical installation and reliable service. The valves are cast, machined, assembled, and tested in South Carolina with proven ASTM quality material. The Apollo Gate valve can reliably be installed in most heating, cooling and non-potable plumbing systems including building service piping and OEM applications.
102T-PRLF Lead Free 200 CWP Bronze RS Gate Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® Model 102T-PRLF (30LF Series) Bronze Gate valve with Press connectors is a proven combination that provides economical installation and reliable service for plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
120T-PR 200 CWP Bronze Globe Valve DESCRIPTION: The APOLLOXPRESS® Model 120T-PR (33 Series) Globe valve with press connections is a proven combination that provides economical installation and reliable service. The valves are cast, machined, assembled, and tested in South Carolina with proven ASTM quality material.
120T-PRLF Lead Free 200 CWP Bronze Globe Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® Model 120T-PRLF (33LF Series) Globe valve with press connections is a proven combination that provides economical installation and reliable service for plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
163T-PR 200 CWP Bronze Swing Check DESCRIPTION: The APOLLOXPRESS® Model 163T-PR (61Y Series) Swing Check valve with press connectors is a proven combination that provides economical installation and reliable service in most heating, cooling and non-potable plumbing systems. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
163T-PRLF Lead Free 200 CWP Bronze Swing Check DESCRIPTION: The Lead Free* APOLLOXPRESS® Model 163T-PRLF (Series 61YLF) Swing Check with press connections is a proven combination that provides economical installation and reliable service for plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
61 SERIES In-Line Bronze Check Valve DESCRIPTION: The APOLLOXPRESS® Model CVB-PR (61 Series) BALL-CONE® check valves with Press connections offer reliable service in most heating, cooling and non-potable plumbing systems. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials. May be installed in both horizontal and vertical flow with upward flow.
61LF SERIES Lead Free Bronze In-Line Check Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® Model CVB- PRLF (61LF Series) BALL-CONE® check valves with Press connections offer reliable protection against reverse flow in plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials. Valves may be installed in both horizontal and vertical flow with upward flow.
59 SERIES Bronze Wye Strainer DESCRIPTION: The APOLLOXPRESS® Model YB-PR (59 Series) Strainers with quick Press connections are designed to protect heating, cooling and non-potable plumbing systems and process equipment from unwanted foreign particles with minimal pressure loss. The valves are built for long reliable service with proven ASTM grade materials and stainless steel strainer. Features Leak Before Press® technology and 250 psig maximum working pressure.
59LF SERIES Lead Free Bronze Wye Strainer DESCRIPTION: The Lead Free* APOLLOXPRESS® YB-PRLF Strainers with quick Press connections are designed to protect plumbing and heating systems including potable water from unwanted foreign particles with minimum pressure loss. The valves are built for long reliable service with proven ASTM grade materials including a Lead Free* bronze body and stainless steel strainer.
www.apollovalves.com APOLLO VALVES Customer Service (704) 841-6000 For additional information, submittal sheets and manuals, visit www.apollovalves.
Available in Press sizes ½” – 2”, four models cover residential, commercial and institutional applications. Featuring sturdy bronze bodies and high flow rates, valves are 100% factory tested and preset at 50 psi. Press connections incorporate Leak Before Press® technology.
36 SERIES Pressure Reducing Valve DESCRIPTION: The APOLLOXPRESS® Model PR-PR (36 Series) Heavy Duty Bronze Pressure Reducing Valves with Press end connections are designed to protect residential and commercial non-potable water distribution systems by controlling excessive pressures. The valves are built for long reliable service with proven ASTM grade materials including a bronze body and cover and integral stainless steel strainer.
36LF SERIES Lead Free Pressure Reducing Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® Model PR-PRLF (36LF Series) Heavy Duty Bronze Pressure Reducing Valves with Press connections are designed to protect residential and commercial potable water distribution systems by controlling excessive pressures. The valves are built for long reliable service with proven ASTM grade Lead Free* materials.
36C SERIES Pressure Reducing Valve DESCRIPTION: The APOLLOXPRESS® Model PRC-PR (36C Series) Pressure Reducing Valves with Press connections are easily installed to protect residential and commercial non-potable water distribution systems by automatically controlling excessive pressure. The dielectric thermoplastic cage provides maximum corrosion resistance. Designed for easy in-line servicing with bottom cleanout and service access.
36CLF SERIES Lead Free Pressure Reducing Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® Model PRC-PRLF (36C Series) Pressure Reducing Valves with Press connections are easily installed to protect residential and commercial potable water distribution systems by automatically controlling excessive pressure. The dielectric thermoplastic cage provides maximum corrosion resistance. Designed for easy in-line servicing with bottom access to seat disc and strainer.
36E SERIES Pressure Reducing Valve DESCRIPTION: The APOLLOXPRESS® Model PRE-PR (36E Series) Pressure Reducing Valve with Press connections is easily installed to protect residential and commercial non-potable water distribution systems by automatically reducing excessive supply pressures. The dezincification resistant bronze body, stainless steel adjusting screw and dielectric polymer cage provide maximum corrosion resistance. Designed for easy in-line servicing with simple cartridge removal.
36ELF SERIES Lead Free Pressure Reducing Valve DESCRIPTION: The Lead Free* APOLLOXPRESS® Model PRE-PRLF (36ELF Series) Pressure Reducing Valves with Press connections are easily installed to protect residential and commercial potable water distribution systems by automatically reducing excessive supply pressures. The dezincification resistant bronze body, stainless steel adjusting screw and dielectric polymer cage provide maximum corrosion resistance.
www.apollovalves.com APOLLO VALVES Customer Service (704) 841-6000 For additional information, submittal sheets and manuals, visit www.apollovalves.
Apollo Model 58A HVAC Balancing Valve combines ball valve flow control simplicity with mult-turn globe valve balance adjustment. The integrated digital position indicator makes technician adjustment quick and easy, leaving no doubt where the valve is set. Valves are DZR brass and available from ½” to 2” sizes, NPT, Sweat and Press.
58A SERIES Balancing Valve DESCRIPTION: Apollo Model 58A balance valves are precision engineered and manufactured valves which provide two position hydronic circuit isolation capability and multi-turn throttling adjustment as required for proportional balancing of hydronic systems. The valves unique needle valve adjustment, with integrated digital readout incorporated into the handle allows qualified technicians to have the valve function as a highly accurate variable orifice flow meter.
The 4A Series of Reduced Pressure Principle Backflow Preventers are available in APOLLOXPRESS® sizes from ½“ to 2”, with Leak Before Press® technology. Featuring bronze bodies and innovative cartridge check design, these assemblies provide protection of potable water against health hazard conditions. Assemblies are 100% factory tested. Available with optional Apollo bronze strainers.
RP4A SERIES Reduced Pressure Valves DESCRIPTION: The APOLLOXPRESS® Model RP4A series Reduced Pressure Backflow Preventers with Press end connections provide maximum protection against back-siphonage or backpressure from substances that are hazardous to the potable water supply. The top accessed modular check valve cartridges provide captured springs, replaceable seats and reversible silicone seat discs.
RP4A SERIES Reduced Pressure Valves FLOW CURVES: Curves developed from independent approval agencies actual tests – Consult factory for details. ■ indicates rated flow as determined by approval agencies, 7.5 ft/sec is the typical maximum Plumbing system flow rate. For additional information, submittal sheets and manuals, visit www.elkhartproducts.com www.elkhartproducts.
RPLF4A SERIES Lead Free Reduced Pressure Valves DESCRIPTION: The APOLLOXPRESS® Model RPLF4A Series Lead Free* Reduced Pressure Backflow Preventers with Press end connections provide maximum protection against back- siphonage or backpressure from substances that are hazardous to the potable water supply. The top accessed modular check valve cartridges provide captured springs, replaceable seats and reversible silicone seat discs.
RPLF4A SERIES Lead Free Reduced Pressure Valves FLOW CURVES: Curves developed from independent approval agencies actual tests – Consult factory for details. ■ indicates rated flow as determined by approval agencies, 7.5 ft/sec is the typical maximum Plumbing system flow rate. For additional information, submittal sheets and manuals, visit www.elkhartproducts.com www.elkhartproducts.
www.apollovalves.com APOLLO VALVES Customer Service (704) 841-6000 For additional information, submittal sheets and manuals, visit www.apollovalves.
The APOLLOXPRESS® small diameter fittings (available in sizes ½” - 2”) feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press® feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Prelubricated, they are fast and simple to install.
FITTINGS Copper Coupling with Stop Copper Coupling without Stop Small Diameter Small Diameter Large Diameter Dimensions shown in inches Item No. 10075500 10075502 10075504 10075506 10075508 10075510 10061947 10061952 10061957 Description 800 ½ CxC CPLG W/ ST 800 ¾ CxC CPLG W/ ST 800 1 CxC CPLG W/ ST 800 1¼ CxC CPLG W/ ST 800 1½ CxC CPLG W/ ST 800 2 CxC CPLG W/ ST 800 2½ CxC CPLG W/ ST 800 3 CxC CPLG W/ ST 800 4 CxC CPLG W/ ST Large Diameter Dimensions shown in inches A 1.72 1.89 2.06 2.33 3.10 3.
FITTINGS Copper Extended Length Coupling Without Stop Dimensions shown in inches Item No. Description 10075030 801 ½ CXC COUPLING W/O STOP 10075032 801 ¾ CXC COUPLING W/O STOP 10075034 801 1 CXC COUPLING W/O STOP A 3.30 3.00 3.58 B 0.95 1.24 1.49 Height 0.95 1.24 1.49 Width 3.30 3.00 3.58 Depth 0.95 1.24 1.
FITTINGS Male Adapter Large Diameter Reducing Adapter Small Diameter Dimensions shown in inches Item No. 10075806 10075808 10075844 10075810 10075812 10075814 10061982 10061987 10061992 10075836 10075838 10075840 10075842 10075854 10075856 10075846 10075848 10075850 10075852 10075858 Reducing Adapter Dimensions shown in inches Description 804 ½ CxM ADAPT 804 ¾ CxM ADAPT 804 1 CxM ADAPT 804 1¼ CxM ADAPT 804 1½ CxM ADAPT 804 2 CxM ADAPT 804 2½ CxM ADAPT 804 3 CxM ADAPT 804 4 CxM ADAPT A B C* 1.92 0.
FITTINGS Copper 45° Street Elbow Small Diameter Dimensions shown in inches Item No. Description 10075054 806-2 ½ FTGxC 45 ST EL 10075056 806-2 ¾ FTGxC 45 ST EL 10075058 806-2 1 FTGxC 45 ST EL 10075084 806-2 1¼ FTGxC 45 ST EL 10075086 806-2 1½ FTGxC 45 ST EL 10075088 806-2 2 FTGxC 45 ST EL 10062037 806-2 2½ FTGxC 45 EL 10062042 806-2 3 FTGxC 45 EL 10062047 806-2 4 FTGxC 45 EL A 2.60 2.96 3.23 3.67 4.09 5.29 5.97 6.62 8.18 B 1.89 2.25 2.33 2.73 3.06 3.95 4.74 5.36 6.74 C* 0.76 0.92 0.93 1.09 1.31 1.
FITTINGS Small Diameter Copper 90° Street Elbow Large Diameter Close Turn Large Diameter Long Turn Small Diameter Dimensions shown in inches Item No.
FITTINGS Copper & Low Lead Brass 90° Female Elbow Dimensions shown in inches Item No. 10066560 10066561 10066562 10066563 10066564 10066565 Description 8707-3 ½ CxF 90 EL 8707-3 ¾ CxF 90 EL 8707-3 1 CxF 90 EL 8707-3 1¼ CxF 90 EL 8707-3 1½ CxF 90 EL 8707-3 2 CxF 90 EL A 2.10 2.58 2.99 3.92 4.43 5.43 10066566 10066567 10066568 10066569 8707-3 ½x⅜ CxF 90 RED EL 8707-3 ½x¾ CxF 90 RED EL 8707-3 ¾x½ CxF 90 RED EL 8707-3 1x½ CxF 90 RED EL 1.97 2.13 2.58 2.97 B C* D** 3.00 0.76 0.74 3.54 0.93 1.03 4.07 0.
FITTINGS Copper Reducing Outlet Tee Single Piece Small Diameter Small Diameter Large Diameter Large Diameter Dimensions shown in inches Description 811 ¾x¾x½ CxCxC TEE 811 1x1x½ CxCxC TEE 811 1x1x¾ CxCxC TEE 811 1¼x1¼x½ CxCxC TEE 811 1¼x1¼x¾ CxCxC TEE 811 1¼x1¼x1 CxCxC TEE 811 1½x1½x½ CxCxC TEE 811 1½x1½x¾ CxCxC TEE 811 1½x1½x1 CxCxC TEE 811 1½x1½x1¼ CxCxC TEE 811 2x2x½ CxCxC TEE 811 2x2x¾ CxCxC TEE 811 2x2x1 CxCxC TEE 811 2x2x1¼ CxCxC TEE 811 2x2x1½ CxCxC TEE 811 3x3x2½ CxCxC TEE 811 4x4x2½ CxCxC TEE
FITTINGS Copper Reducing Run/Outlet Tee - Small Diameter Dimensions shown in inches For additional information, submittal sheets and manuals, visit www.elkhartproducts.com Item No.
FITTINGS Copper Reducing Run/Outlet Tee - Small Diameter (cont’d) Dimensions shown in inches Item No.
FITTINGS Copper Reducing Run/Outlet Tee - Large Diameter Dimensions shown in inches For additional information, submittal sheets and manuals, visit www.elkhartproducts.com Item No.
FITTINGS Copper Bullhead Tee Small Diameter Large Diameter Dimensions shown in inches Item No. 10066070 10066006 10066071 10066008 10066128 10066107 10066090 10066550 10066551 10066135 10066094 Description 811 ½x½x¾ CxCxC BH TEE 811 ½x½x1 CxCxC BH TEE 811 ¾x¾x1 CxCxC BH TEE 811 1x1x1¼ CxCxC BH TEE 811 1x1x2 CxCxC BH TEE 811 1¼x1¼x2 CxCxC BH TEE 811 1½x1½x2 CxCxC BH TEE 811 1½x1½x3 CxCxC BH TEE 811 2x2x3 CxCxC BH TEE 811 2½x2½x3 CxCxC BH TEE 811 2½x2½x4 CxCxC BH TEE A 5.70 6.69 6.38 6.75 10.05 9.42 9.
FITTINGS Copper Tube Cap Small Diameter Dimensions shown in inches Item No. Description A B 10075166 817 ½ TUBE CAP 1.13 0.95 10075168 817 ¾ TUBE CAP 1.19 1.24 10075170 817 1 TUBE CAP 1.35 1.49 10075172 817 1¼ TUBE CAP 1.53 1.75 10075174 817 1½ TUBE CAP 1.80 2.11 10075176 817 2 TUBE CAP 2.15 2.58 10062142 817 2½ COPPER TUBE CAP 3.64 3.16 10062147 817 3 COPPER TUBE CAP 4.07 3.68 10062152 817 4 COPPER TUBE CAP 4.96 4.70 *Cup Depth (Dim C) Tolerance : Sizes 1/2”- 2” +/- .045, Sizes 2-1/2”- 4” +/-.015 C* 0.
FITTINGS Copper Fitting Reducer Lead Free Brass Female Union Small Diameter Large Diameter Dimensions shown in inches Item No. 10075872 10075874 10075876 10075878 10075880 10075882 Item No.
Note – This installation guide covers the general installation practices for APOLLOXPRESS® fittings and valves in applications listed within. It is the sole responsibility of the installing professional to insure installation meets local code requirement. Failure to observe installation instructions may result in substandard performance.
SYSTEM DESCRIPTION LISTINGS, APPROVALS AND CODES Small Diameter Fittings ½” -2” APOLLOXPRESS® small diameter fittings are made from naturally lead free copper or lead free brass in the USA. EPDM O-rings are pre-installed and lubricated with ANSI/NSF 61 listed silicone oil.
INSTALLATION GUIDE & PRESSING INSTRUCTIONS GENERAL INSTALLATION INSTRUCTIONS Handling APOLLOXPRESS® fittings and valves should remain in their packaging immediately prior to installation. This ensures the fitting remains un-damaged and clean from on-site debris. Unused fittings should be kept in the original packaging with any openings sealed to ensure fitting cleanliness is maintained. Components should be free from dirt, debris and grime that may interfere with the sealing EPDM O-ring.
INSTALLATION GUIDE & PRESSING INSTRUCTIONS MINIMUM SPACING Fitting Size ½” ¾” 1” 1 ¼” 1 ½” Minimum Spacing 0” 0” 0” ½” 5/8” Fitting Size 2” 2 ½” 3” 4” Minimum Spacing ¾” 5/8” 5/8” 5/8” Between an APOLLOXPRSS® Joint and Existing Solder Joint The minimum distance when making an APOLLOXPRESS® joint near a solder joint is in the table below. No residual solder, flux, or debris should be on the tubing. Tube Dia. ½” ¾” 1” 1 ¼” 1 ½” Minimum Distance ¼” ¼” 7/16” 7/16” 5/8” Tube Dia.
PRESSING INSTRUCTIONS TOOLS APOLLOXPRESS® products are tested and approved for use with multiple tool manufacturers. Please see our “Jaw Compatibility” on page 65 for specific approvals. Like other tools and equipment pressing tools and their accessories require servicing. Please follow tool manufacturer instruction. Pressing Instructions 1 Cut the tube square using a rotary tube cutter or fine toothed steel saw.
INSTALLATION & PRESSING INSTRUCTIONS Jaw Pressing Instruction Typically for ½” Through 2” Sizes Insert the tube into the fitting or valve with twisting motion until it meets tube stop AND insertion depth mark. Wetting the tube, fitting or valve with clean water may reduce insertion force. 2 Using approved press tool and jaw of the correct size, open the jaw and place over the bead of the fitting or valve at a 90 degree angle to the tube centerline. 3 Press.
JAW COMPATIBILITY Approval is granted based on laboratory testing performed by Elkhart Products Corporation (EPC) utilizing performance requirements in IAPMO PS117, proprietary standards developed by EPC, and by following the jaw, actuator, and pressing tool operating instructions. The following best practices apply as a requirement of all approvals. • Jaws require cleaning to remove copper buildup or chips.
CROSS REFERENCE CHART Apollo Part Number Size Description 200 CWP BRONZE GATE VALVE, RS 200 CWP Gate,Brz, Threaded Bonnet, 30-003-01-PR 1/2 Solid Disc, RS, Press 200 CWP Gate,Brz, Threaded Bonnet, 30-004-01-PR 3/4 Solid Disc, RS, Press 200 CWP Gate,Brz, Threaded Bonnet, 30-005-01-PR 1 Solid Disc, RS, Press 200 CWP Gate,Brz, Threaded Bonnet, 30-006-01-PR 1 1/4 Solid Disc, RS, Press 200 CWP Gate,Brz, Threaded Bonnet, 30-007-01-PR 1 1/2 Solid Disc, RS, Press 200 CWP Gate,Brz, Threaded Bonnet, 30-008-01-PR 2
CROSS REFERENCE CHART APOLLOXPRESS® Valves Apollo Part Number Size 36LF-205-01-PR 1 36LF-206-01-PR 1 1/4 36LF-207-01-PR 1 1/2 36LF-208-01-PR 2 Description Valve, Press Red, 36200 Series, LF Brz, Press Valve, Press Red, 36200 Series, LF Brz, Press Valve, Press Red, 36200 Series, LF Brz, Press Valve, Press Red, 36200 Series, LF Brz, Press NIBCO No. Viega Model No.
CROSS REFERENCE CHART APOLLOXPRESS® Valves 68 Size Description 77W-106-01 77W-107-01 77W-108-01 1 1/4 1 1/2 2 77W-143-01 1/2 77W-144-01 3/4 77W-145-01 1 77W-146-01 1 1/4 77W-147-01 1 1/2 77W-148-01 2 77W-103-HC 1/2 77W-104-HC 3/4 77W-143-HC 1/2 77W-144-HC 3/4 77W-103-11 1/2 77W-104-11 3/4 77W-105-11 1 77W-106-11 1 1/4 77W-107-11 1 1/2 77W-108-11 2 77W-143-11 1/2 77W-144-11 3/4 77W-145-11 1 77W-146-11 1 1/4 77W-147-11 1 1/2 77W-148-11 2 Ball Valve, Brz, Press
CROSS REFERENCE CHART APOLLOXPRESS® Valves Apollo Part Number Size 77V-147-01 1-1/2 77V-148-01 2 77V-149-01 2-1/2 For additional information, submittal sheets and manuals, visit www.elkhartproducts.
CROSS REFERENCE CHART Fittings 10075030 10075032 10075034 10075900 10075144 10075898 10066073 10066001 10075896 10066380 10066381 10066003 10075128 10066082 10066398 10066005 10066072 10075130 10066440 10066441 10066442 10066074 10066444 10066445 10066446 10066076 10066447 10066151 10066152 10075750 10075752 70 Description Viega Cross NIBCO cross 800 ½ CxC Copper Coupling with Stop 800 ¾ CxC Copper Coupling with Stop 800 1 CxC Copper Coupling with Stop 800 1¼ CxC Copper Coupling with Stop 800 1½ CxC C
CROSS REFERENCE CHART Fittings XPress Product Number 10075804 10075802 10075806 10075808 10075844 10075810 10075812 10075814 10075806 10075808 10075844 10075810 10075812 10075814 10061982 10061987 10061992 10075836 10075838 10075840 10075842 For additional information, submittal sheets and manuals, visit www.elkhartproducts.
CROSS REFERENCE CHART XPress Product Number 10062007 10062012 10062017 10062071 10062073 10062074 10066560 10066561 10066562 10066563 10066564 10066565 10066566 10066567 10066568 10066569 10066570 10066571 10066572 10066573 10066574 10066575 10066576 10066577 10066578 10066418 10075366 10075368 10075369 10075367 72 Description 807-C-2 2½ FTGxC Copper Close Turn 90 Street Elbow 807-C-2 3 FTGxC Copper Close Turn 90 Street Elbow 807-C-2 4 FTGxC Copper Close Turn 90 Street Elbow 807-L-2 2½ FTGxC Copper Long T
CROSS REFERENCE CHART Fittings For additional information, submittal sheets and manuals, visit www.elkhartproducts.
CROSS REFERENCE CHART Fittings 10066579 10066580 10066155 10066581 10066582 10066583 10066584 10066585 10066586 10066587 10066588 10066589 10075166 10075168 10075170 10075172 10075174 10075176 10062142 10062147 10062152 10075146 10075150 10075148 10075336 10075154 10075156 10075332 10075334 10075158 10075160 10075338 10075340 10075162 10075152 10075164 10068025 10068001 10068002 74 Description 811BH 1½ x 1½ x 3 CxCxC Copper Bullhead Tee 811BH 2 x 2 x 3 CxCxC Copper Bullhead Tee 811BH 2½ x 2½ x 3 CxCxC Co
NOTES: For additional information, submittal sheets and manuals, visit www.elkhartproducts.com www.elkhartproducts.
Terms & Conditions/Warranty Information TERMS & CONDITIONS OF SALE • Payment: 2% 10th prox. Net 30 days. • All prices F.O.B. shipping point with freight allowed on shipments of 750 pounds and/or $5,000 net minimum to all shipping points within the United States excluding Alaska and Hawaii. No freight allowed on Air Freight or Parcel Post shipments. Claims for shortages must be made within 10 days of receipt of material. Our responsibility ends when a delivery receipt is furnished us by the carrier.
APOLLO VALVES & ELKHART PRODUCTS SALES MANAGERS & INTERNATIONAL SALES MANAGERS For additional information, submittal sheets and manuals, visit www.elkhartproducts.com AREAS COVERED EMAIL DIRECTOR OF INDUSTRIAL SALES Mike Green Industrial mike.green@conbraco.com REGIONAL SALES MANAGERS – INDUSTRIAL Dave Eck Northeast david.eck@conbraco.com JR Fortenberry Mountain States jr.fortenberry@conbraco.com Ken Griffin Southeast ken.griffin@conbraco.com Jim Todman Canada jim.todman@conbraco.
APOLLO VALVES CUSTOMER SERVICE: Phone: (704) 841-6000 www.apollovalves.com AGENCY AREAS COVERED EMAIL PHONE FAX Mid South Marketing, Inc. Midwest Spec Pro Marketing, Inc. Spirit Group Tim Morales & Associates, Inc. White Wolf Group VA/MD/Washington DC/WV-East Southern OH, KY NC/SC/TN-East FL (except Panhandle) AL/LA/FL Panhandle GA michael.uecker@msmsales1.com rvsales@mwspec.com sales@promarketinginc.net info@spiritgroupinc.com sales@timmorales.com info@whitewolfgroupinc.
ELKHART PRODUCTS CORPORATION CUSTOMER SERVICE: Phone: (574) 264-3181 EMAIL PHONE FAX District of Columbia, MD VA Southern NJ, Eastern PA, DE NC, SC, Eastern TN GA FL, except panhandle AL and FL panhandle info@harryeklof.com sales@promarketinginc.net info@whitewolfgroupinc.com info@spiritgroupinc.com sales@timmorales.
American Made Quality you can Depend On. Mechanical Leak Before Press® on small diameter, within a 120 degree turn. Deepest cup depth on the market. Short turn elbows for space saving alternatives. Radial orientation on installation is not necessary on the APOLLOXPRESS® line. VISUAL and Mechanical Leak Before Press® feature on our large diameter fittings. Patented stainless steel grab ring on large diameter 2 1/2” - 4” Unique Floating flanges can be put back in place during installation.
