Submittal Sheet

Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO#:
Rep:
Wholesale Dist.:
SUBMITTAL
SHEET
This specification is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion
of this specification without notice and without incurring obligation to make such changes to Conbraco products
previously or subsequently sold. Please visit apollovalves.com for the most current information.
Customer Service [phone]
www.apollovalves.com
STANDARD MATERIALS LIST
BODY/Cap ASTM B584 Bronze
SPRING Alloy Steel, Plated
SEAT Silicone
AVAILABLE CONFIGURATIONS
SERIES
NUMBER
SIZE (in.)
FNPT x FNPT
Height
(in.) (mm)
Width
(in.) (mm)
Weight
(lbs.) (kgs.)
10604
10614
3/4 x 3/4
3/4 x 1
5.3 (133) 3.2 (81) 2.3 (1.1)
10605
10615
1 x 1
1 x 1-1/4
6.7 (170) 4.0 (102) 4.0 (1.8)
10606
10616
1-1/4 x 1-1/4
1-1/4 x 1-1/2
8.4 (213) 5.1 (129) 7.7 (3.5)
10607
10617
1-1/2 x 1-1/2
1-1/2 x 2
10.8 (274) 5.9 (150) 11.25 (5.1)
10608
10618
2 x 2
2 x 2-1/2
14.0 (356) 7.2 (183) 23.5 (10.6)
PSIG SUFFIX
Sux
Set
Pressure
Sux
Set
Pressure
01 15 17 85
02 20 18 90
03 22 19 95
04 25 20 100
05 30 21 105
06 35 22 110
07 40 23 115
08 43 24 120
09 45 25 125
10 50 30 130
11 55 31 135
12 60 32 140
13 65 33 145
14 70 34 150
15 75 35 155
16 80 36 160
PART NUMBER MATRIX
10 XX X X X
SERIES
NUMBER
MODEL INLET SIZE
SET
PRESSURE
OPTION
10 60 = Standard Outlet 4 = 3/4”
PSIG (15-160)
See Table
CE = CE
61 = Oversize Outlet 5 = 1”
6 = 1-1/4”
7 = 1-1/2”
8 = 2”
SS1032 © 12/16 Page 1 of 1
FEATURES
• Sizes: 3/4” – 2” (20 – 50mm)
• ASME Section IV Certified Capacity
• Corrosion Resistant Construction
• Diaphragm Isolated Spring Chamber
• Extremely High Capacity
• Made in the USA
APPROVALS
• ASME Section IV Heating Boilers
• Canadian Registration Number 0G8547.5C
• Pressure Equipment Directive 2014/68/EU (PED)
ASME Section IV capacity certified bronze safety relief valve for protection of hot water heating boilers, systems and similar equipment. It can
be pre-set to any pressure ranging from 15 to 160 psig (1 to 11 bar) at 250°F (121°C) max
Model RVW60
ASME Hot Water Safety Relief Valve
10600 Series
CAPACITY, BTU/Hr
ASME HV Rating - 90% of Actual Capacity at 10% Overpressure
RVW60 (10600) Standard Discharge Port
PSIG
3/4”
10604
1”
10605
1-1/4”
10606
1-1/2”
10607
2”
10608
15 541,000 876,000 1,515,000 2,061,000 3,397,000
30 827,000 1,339,000 2,316,000 3,151,000 5,193,000
50 1,209,000 1,956,000 3,384,000 4,604,000 7,589,000
100 2,162,000 3,500,000 6,055,000 8,238,000 13,577,000
125 2,639,000 4,272,000 7,390,000 10,054,000 16,571,000
150 3,116,000 5,044,000 8,725,000 11,871,000 19,565,000
RVW61 (10610) High Capacity Discharge Port
PSIG
3/4”
10614
1”
10615
1-1/4”
10616
1-1/2”
10617
2”
10618
15 635,000 1,027,000 1,777,000 2,417,000 3,984,000
30 970,000 1,570,000 2,716,000 3,696,000 6,091,000
50 1,418,000 2,295,000 3,969,000 5,400,000 8,900,000
100 2,536,000 4,105,000 7,101,000 9,661,000 15,924,000
125 3,096,000 5,011,000 8,668,000 11,792,000 19,435,000
150 3,655,000 5,916,000 10,234,000 13,923,000 22,947,000