User`s guide

User’s Guide
Contents
Introduction 2
Before Getting Started 2
Four Steps to Getting Started 2
Order of Apogee Interface Connection 3
AD&DA-16X Standard Routing 3
AD-16X Standard Routing 3
Order of Apogee Interface Connection (continued) 4
Multiple Digidesign PCI cards 4
Incorporating Digidesign and other HD-compatible interfaces 4
Clock Connections 5
Using a Master Clock (such as Apogee’s Big Ben) 5
Clocking to the rst interface 5
Clock Connections 6
Incorporating a SYNC I/O 6
DigiLink Connections 7
Conguring Pro Tools 8
Hardware Setup 8
I/O Setup 8
Conguring Pro Tools (continued) 9
Working with Delay Compensation 9
AD-DA16X Advanced Routing 9
Interface Connections Chart: Standard Routing 10
ROSETTA 800 11
AD-16X & DA-16X 11
AD-16X & DA-16X 12
AD-16X, DA-16X & ROSETTA 800 12
AD-16X, DA-16X & ROSETTA 800 13
ROSETTA 800 and AD-16X & DA-16X 13
ROSETTA 800 and AD-16X & DA-16X 14
DIGI, AD-16X, DA-16X & ROSETTA 800 14
Interface Connections Chart: Advanced Option Routing 15
AD-16X & DA-16X 15
AD-16X & DA-16X 15
AD-16X, DA-16X & ROSETTA 800 16
DIGI, AD-16X & DA-16X 16
Installing the X-HD card 17
Your X-HD card should include the following: 17
Upgrading Firmware on the X-HD card 18
Upgrading Firmware on the X-HD card 19