User`s guide

APOGEE ELECTRONICS
50
Symphony64 PCI card – User’s Guide
Maestro
Menu by Menu
Maestro> About Maestro
Selecting this menu item opens the window
shown at right, which indicates various
software and rmware versions.
Maestro > Preferences
Selecting this menu item opens the Preferences window, in which mixer control actions may be dened.
Rotary Controls
Mouse motion – This selection denes the motion of
the mouse required to adjust rotary controls.
Fine adjust key – This selection denes the key com-
mand to make ne adjustments to any rotary control.
Fader Controls
Fine adjust key - This selection denes the key com-
mand to make ne adjustments to any fader control.
0dB key – This selection denes the key command to
set the fader to 0 dB when clicking in the level value
window.
Ungroup faders - This selection denes the key com-
mand to adjust one side of the stereo From Mac and To
Hardware faders.
Pan Controls
Fine adjust key - This selection denes the key com-
mand to make ne adjustments to any pan control.
Center - This selection denes the key command to set
the pan control to <0>, or center, when clicking in the
pan value window.
Other
Mute/Solo all - This selection denes the key command
to engage all Mutes or Solos when clicking on the Mute
or Solo buttons.
Additional Preferences
Launch Maestro automatically when connecting a
device - When this box is checked, Maestro is launched
automatically when an Apogee device is detected.