User`s guide

Symphony Mobile – User’s Guide
5
Quick Start Guide
Quick Start Guide
Conguring Symphony Mobile with Logic
Pro
Open Audio > Audio Hardware and Drivers >
Drivers > CoreAudio and check the Enabled
box.
Click “OK” when prompted by Logic.
SelectSymphonyMobileintheDrivereld
(Figure 1), and click Try (Re)–Launch when
prompted by Logic.
To “customize” the I/O routing labels in Logic to
match Symphony Mobile hardware I/O, open
Audio > Audio Conguration. Under the View
menu, select I/O Labels. Under the Drivers’ I/O
Labelcolumn,option–clicktherstradiobutton
of each group of I/O labels (Figure 2).
VBus and High Performance Settings
ConguringSymphonyMobilewithLogic
To instantiate VBus signal paths, open Maestro,
select Window>Maestro Control, and select
the desired numbers of buses in the VBus
Selections drop down menu.
For the best latency performance, set
Performance Tuning to High Performance.
For more details concerning VBus and
Performance Tuning, please see page 4 of the
Maestro User’s Guide
6
Figure 1
Figure 2
7