User`s guide

APOGEE ELECTRONICS
11
ROSETTA 800 – User’s Guide
Configuration Examples - continued
CONFIGURATION #3 (advanced settings) :
To configure the Rosetta 800 to accept 6 channels of analog input and 2 channels of AES input for recording on
an ADAT digital device while monitoring the ADAT device output via the ANALOG OUTs, make the FRONT PANEL
SELECTIONS and REAR PANEL CONNECTIONS as follows:
FRONT PANEL SELECTIONS
REAR PANEL CONNECTIONS
ANALOG OUT
To monitor system
ADAT IN/OUT
from ADAT device ie.
computer based DAW, MDM,
DAT machine, etc.
AES IN/OUT
from/to AES device
ie. CD burner, DAT machine,
hard disk recorder, etc.
ANALOG IN
From mixing console
or other analog source
Select “ADAT”
as SOURCE TO ANALOG OUT
Select “AES” and “ANALOG”
as SOURCE TO DIGITAL OUTS
(refer to “SOURCE TO DIGITAL OUTS
Advanced Settings” on page 6)
SEE FLOW DIAGRAM ON PG. 12