User Guide

Conﬁguring ONE’s Inputs on Mac

ONE’s two inputs may be conﬁgured in the following manner:

•

Internal (built-in) microphone + 1/4” instrument

•

External (XLR) microphone + 1/4” instrument

•

External 48V (XLR) microphone + 1/4” instrument

When using an XLR microphone or 1/4” instrument, connect to ONE’s breakout cable.

Open Apogee Maestro software (found in your Mac’s Applications folder),

and select the Input tab.

Select the Analog Level setting that corresponds to the microphone source you’d like

to record. For example, if you have a microphone connected to the XLR connection on

the breakout cable, select Ext Mic from the Analog Level menu on channel 1. If you

would like to utilize ONE’s built-in microphone, select Int Mic. Channel 2’s source is

always the 1/4” Instrument input.

Note: If you are using a condenser

microphone that requires phantom power,

select Ext Mic 48V. Phantom power is

indicated on ONE’s display by

a red dot above the microphone icon.

Getting Started - Apogee ONE User’s Guide