User`s guide

APOGEE ELECTRONICS

Mini FireWire card – User’s Guide

Working with Windows XP

Installing the Driver

Load the included Apogee Software CD, and unzip the Minifw_Windows_XP_driver folder.

Before starting the setup.exe driver installation program, disconnect the Mini FireWire card from

the computer. You will be instructed at which point during the driver installation process to connect the

Mini FireWire card. If you have multiple units, be sure to connect them all when instructed to do so.

1 Double click on the setup.exe.

2 As noted onscreen, disconnect the Mini FW-

equipped interface,then click on Next.

If a previous version of the driver was

installed, this window will be preceded by an

uninstallation procedure.