User`s guide

Duet – User’s Guide
35
Maestro
Maestro 2
Maestro Mixer Settings
After making the input selection and setting gain, the signal should be displayed on both
the Input and Mixer Master meters. If the Input’s Over LED lights, reduce the input gain in
the Maestro Control window. If the Mixer Master’s Over LEDs light, reduce the Input fader.
Now start playback in your recording software. The playback signal should be displayed
on the Software Return and Mixer Master’s meters. Use the Software Return and Input
faders to establish your desired balance between the input and playback signals. If you’ve
found a good balance but the Mixer Master’s Over LEDs light, reduce the Mixer Master
fader.