User manual

The Ensemble control panel is divided into three parameter groups. From top to bottom,
these are Global, Units, and Setup.
• Global parameters, at the top of the window, are only relevant if more than one
Ensemble device is connected to your system; they define how several devices work
together. See Apogee Ensemble Global Parameters.
• Units parameters, shown in the center of the window, are used to configure individual
hardware units. There are three tabs; General, Input, and Output. See Apogee Ensemble
Units Parameters.
• Setup parameters, shown at the bottom of the window, allow you to save and load
different Apogee hardware configurations. See Apogee Ensemble Setup Buttons.
8 Chapter 1 Using Apogee’s Ensemble