User manual

Apogee ONE hardware can be controlled by MainStage.
This chapter covers the following:
• Overview of the Apogee Control Panel (p. 19)
• Apogee ONE Input Parameters (p. 20)
• Apogee ONE Output Parameters (p. 21)
Overview of the Apogee Control Panel
The Apogee control panel automatically displays the parameter set that applies to your
connected audio device.
To open the Apogee control panel
µ
Choose MainStage > Open Apogee Control Panel.
The ONE control panel is divided into two parameter groups: Input and Output.
• Input parameters: Use to configure the inputs of your ONE interface. See Apogee ONE
Input Parameters.
• Output parameters: Use to configure the outputs of your ONE interface. See Apogee
ONE Output Parameters.
19
Using Apogee’s ONE
3