User`s guide

Operation
Configuring the Input
Mac
1. Connect your input source (see analog inputs section>)
2. Open Apogee Maestro software (found in your Mac’s Applications folder), and select the Input tab.
3. Select the Analog Level setting that corresponds to the device you have connected to Duet’s input(s).
+4 dBu: line level
-10 dBV: line level
Mic: XLR microphone (dynamic, condenser or ribbon)
Inst: 1/4” Instrument (electric guitar, bass, keyboards)
4. If you are using a condenser microphone that requires phantom power, select the 48V box on the Input
tab of the appropriate channel in Maestro. Phantom power is indicated on Duet’s display by a red dot above
the microphone icon.
48V Phantom power
button in Maestro
48V Phantom power
indicator on OLED Display
Software Setup - Apogee Duet User’s Guide
25