User`s guide

System Setup (Mac only)
1
2
3
4
5
1. Device Icon & ID Button (Mac only) - A device
icon and ID button is placed adjacent to each row
of parameters to identify the hardware unit to
which the row belongs. By clicking on the ID
button, the corresponding hardware unitʼs front
panel will illuminate. Each hardware unit is
assigned a Peripheral Prefix which is displayed on
the ID button.
2. Setting Sample Rate - This drop down selects
the sample rate. Under certain circumstances, (for
example, when a DAW session is open) this
setting will be overridden by software sample rate
settings.
3. Peak Hold - This pop-up menu sets the time that
peak indications are held on software and front
panel meters.
4. Over Hold - This pop-up menu sets the time that
over indications are held on software and front
panel meters.
5. Keyboard Volume Control - The Audio Output
drop down menu sets the hardware output that’s
controlled by the Mac keyboard volume control.
Maestro - Apogee Duet User’s Guide
22