User`s guide

Analog Inputs

1. Connect the provided breakout cable to the Analog I/O port on the rear of the unit

2. Connect your analog input source(s) to either of the 2 combination connectors on Duet’s breakout cable:

Microphone: XLR connection to

Duet’s combination connector

Instrument:1/4” connection to

Duet’s combination connector

+4 dBu/-10 dBV line level device:

XLR connection to Duet’s

combination connector

Note: Input source must be selected within Apogee’s

Maestro application. See Conﬁguring Inputs

Section>

3. To adjust the volume, press Duet’s Multi-function

Controller Knob until either the microphone or

instrument icon is lit on the Duet’s display and

turn the knob clockwise to increase the volume.

IN 2

Learn more about adjusting input/output levels

here>

Getting Started - Apogee Duet User’s Guide