Specifications

6
Panel Descriptions
9
10
1
2
3
4
5
6
7
8
11
DLC24 Rear Panel
1. IEC Inlet
100 – 240V, 1.1A, 50-60 Hz AC power receptacle.
2. Signal Ground Switch
Select whether the DLC24’s power supply ground is connected to chassis ground or “lifted”.
3. Control Selector Switch
Select Front or Remote Control.
4. Input Selector Switch
Select whether the DLC24 accepts analog or digital signals through the XLR inputs.
5. Reset Button
Recessed button offers both a soft and hard reset.
6. Amplifier Sense Returns Barrier Strip
Monitors the amplifier’s output voltages in order to engage protective limiters necessary
to prevent damage to speakers. The connections are labeled 1 through 4 and correspond
to the XLR outputs.
7. Output Signal Connections
Four balanced 3-pin XLR male signal output connectors.
8. Input Pin 1 Shield Switch
Select whether “IN 1” and “IN 2” Input’s Shield (Pin 1) is connected to chassis ground
or “lifted”.
9. Input Signal Connections
Two balanced 3-pin XLR female signal input connectors. Note: Only “IN 1” is active
when Input Selector Switch is set to Digital.
10. RS-422 Input Connection
Remote PC connection is made via this 5-pin XLR female RS-422 port.
11. RS-422 Loop Connection
DLC24/PC network connection can be paralleled via this 5-pin XLR male RS-422 port,
making it possible to daisy-chain multiple DLC24 units.