Specifications

4
DLC24 Description
The DLC24 is a loudspeaker controller designed to provide the key elements that help ensure optimal loudspeaker
system performance and management in a variety of live sound and fixed installation applications.
The DLC24 is intended to be the last device in the signal chain before the power amplifier(s). It is usually fed signal from
a mixing console, although the source may be one of a number of devices such as a tape player, CD player,
or equalizer.
The DLC24 is a two-input, four-output controller that can be configured for any combination of Apogee speaker types
using proprietary software included with the unit.
Once configured, the DLC24 recalls all loudspeaker parameters on power up, no additional programming required. When
set to Front Control, it operates like a classic analog loudspeaker controller with local level control, polarity control, and
filter control, as well as signal, limit, and overload indicators.
With the addition of Apogee Digital Audio Management (ADAM) software and a PC, the user gains remote access to all
front panel controls, 12 bands of parametric equalization (per channel), over 1356 milliseconds of delay (per channel),
snapshots, a wide assortment of speaker status information plus system design capabilities (rooms, arrays, subarrays, etc.).
The DLC24 can accept either analog or digital input signal and can be networked with other DLC24's. The DLC24 and
Apogee’s APL-DSP powered loudspeakers can operate simultaneously on the same network. The DLC24 is also
designed to be compatible with other control systems.
Package Contents
DLC24 Loudspeaker Controller
Installation and Use Manual
IEC Line Cord
(2)Two Pluggable Screw Terminal Blocks
(2) Two Model Designation Label Sheets
Care and Maintenance
The plastic lens of the DLC24 employs light plate technology. Heavy oily residue, fingerprints, or scratches can allow
light to escape from the plastic lens. To clean the DLC24, first unplug the unit and then gently wipe it with a soft
cloth or facial tissue lightly dampened with water and/or a mild cleanser. Never use a paper towel since it may
scratch the acrylic lens.
The DLC24’s lens can be safely marked with China marker pencils. The writing will illuminate because of the light
plate technology. The writing can be removed by gently wiping with a dry facial tissue. The rest of the DLC24 unit can
be cleaned using a mild soap and a soft cloth.
After cleaning, make sure the DLC24 has dried completely before reconnecting it to the AC mains. All other maintenance
should be referred to qualified service personnel.
Description