Specifications

Application Configuration 4

Select an ALA9 for Output 1. Since the ALA9 is a tri-amped preset, DLC24 Configuration Software automatical-

ly fills Output 1 with the high frequency (HF), Output 2 with the mid frequency (MF), and Output 3 with the low

frequency (LF). Polarity, Channel Membership, and Input Selection are automatically selected for Outputs 2 and 3

based on the selections for Output 1.

Enable “Polarity” if required. Select “Ch A” for the Channel Membership. Once “Ch A” is selected, “In 1” will auto-

matically be selected for the Input Selection.

Select an AE12s2 for Output 4. “Polarity” is enabled by default. Select “Ch B” for the Channel Membership. Once

“Ch B” is selected, “In 2” will automatically be selected for the Input Selection

Type a description for both Channel A and Channel B. This description will appear in ADAM at the top of the

channel/loudspeaker panel window and the loudspeaker status window. It can be changed later in ADAM.

Stereo Tri-Amp with Aux-Fed Subwoofer