Specifications

Application Configuration 3

Select an SSM for Output 1. Enable “Polarity” if required. Select “Ch A” for the Channel Membership. Once “Ch A” is

selected, “In 1” will automatically be selected for the Input Selection.

Select an SSM for Output 2. Enable “Polarity” if required. Select “Ch A” for the Channel Membership. “In 1” will

automatically be selected, although this can be overriden by selecting “In 2” in order to maintain true stereo operation.

Select an AFI-118 for Output 3. Polarity (by default) is always enabled for subwoofers. Select “Ch B” for Channel

Membership. “In 2” will automatically be selected, although this can be overriden by selecting “(In 1 + In 2) / 2” for

the Input Selection.

Type a description for both Channel A and Channel B. This description will appear in ADAM at the top of the

channel/loudspeaker panel window and the loudspeaker status window. It can be changed later in ADAM.

Note: SSM overall gain (left and right) will be controlled via “Ch A”. Left to right ratio will be con-

trolled via the source. Subwoofer gain (left and right) will be controlled via “Ch B”.

Stereo Single Amp with Subwoofer