Specifications

23
Application Configuration 2
Select an AE5 for Output 1. Since the AE5 is a bi-amped preset, DLC24 Speaker Configuration Software automatically
fills Output 1 for the high frequency (HF) and Output 2 for the low frequency (LF). Polarity, Channel Membership, and
Input Selection are automatically selected for Output 2 based on the selections for Output 1.
Enable “Polarity” if required. Select “Ch A” for the Channel Membership. Once “Ch A” is selected “In 1” will automatically
be selected for the Input Selection.
Select an AE5 for Output 3. Since the AE5 is a bi-amp preset, ADAM automatically fills Output 3 for the high frequency
(HF) and Output 4 for the low frequency (LF). Polarity, Channel Membership, and Input Selection are automatically
selected for Output 4 based on the selections for Output 3.
Enable “Polarity” if required. Select “Ch B” for the Channel Membership. Once “Ch B” is selected “In 2” will automatically
be selected for the Input Selection.
Type a description for both Channel A and Channel B. This description will appear in ADAM at the top of the
channel/loudspeaker panel window and the loudspeaker status window. It can be changed later in ADAM.
Stereo Bi-Amp