Specifications

After having downloaded the Speaker Configuration file to the DLC24,
launch the ADAM software.
ADAM Software
After launching ADAM, select the COM port for the software to
access the unit or network. If there are multiple COM ports for dif-
ferent zones, all the relevant COM ports may be selected by holding
down the CTRL key while selecting the COM ports. The software will
combine the information from all active COM ports and display the
speakers within the software as one large network. It is not neces-
sary to switch between networks to control or monitor speakers on
different COM ports.
User/Designer Mode
ADAM starts in User Mode by default. In User Mode all network
monitoring functions are available, but only Master Level and
Master Mute controls are active. In Designer Mode, the user retains
all network monitoring functions while also gaining the ability to create
and control an entire system in ADAM. Designer Mode allows the
user to access features such as gain, delay, equalization, loud-
speaker status, etc.
To enter into Designer Mode, go to the View drop-down menu and
select Designer. Enter the factory default password “designer”. The
password is not case sensitive and may be changed at any time.
The user must be in Designer Mode for the Change Password
option to become active in the View drop-down menu. In the lower
right-hand corner of the window, the software will read “USER” or
“DESIGNER” depending on what mode it is in.
9
10
1
3
4
5
6
7
8
2
11
12
13
Software
14
1. New
Creates a new document.
2. Open
Opens an existing document.
3. Save
Saves the active document.
4. Remove
Removes a selected item.
5. Copy
Copies a selected item.
6. Paste
Pastes a removed or copied
item.
7. Rediscover
Rediscovers all speakers.
8. Move Up
Moves a selected item up.
9. Move Down
Moves a selected item down.
10. Sort Ascending
Sorts in ascending order.
11. Sort Descending
Sorts in descending order.
12. Print
Prints the active document.
13. Tool Tips
Enables tool tips.
ADAM Toolbar
MODE INDICATOR