Specifications

Software

1. Outputs

Apogee speaker types are selected from the drop-down menu next to each output. An AE5 has been

selected for Output 1 in the example shown. Since the AE5 is a bi-amped speaker it requires two

outputs. As a result, Output 2 has been automatically selected with Output 1 representing the high

frequency (HF) of the AE5; and Output 2, the low frequency (LF) of the AE5. An AESB has been selected for

both Output 3 and Output 4 in the example.

2. Polarity

Polarity may be enabled or disabled. When enabled, the Polarity Switch on the front panel of the DLC24

is active as is the Polarity box in ADAM. When disabled, neither the front panel switch on the DLC24

nor the Polarity box in ADAM are operable. When a subwoofer is selected, such as the AESB, “Enable”

is automatically selected, though it can be deselected. In the example, both AESB’s are enabled

whereas the AE5 is disabled. When bi-amped or tri-amped speakers are chosen, the polarity setting for all

associate

d outputs will change when the active button is changed.

3. Channel Membership

Channel Membership is selected on an individual speaker basis. When a speaker requires multiple

outputs, whatever channel is selected for the first output will automatically be selected for any additional

outputs reserved for that speaker. For example, with an AE5, if “Ch A” is selected for the high

frequency (HF), “Ch A” will automatically be selected for the low frequency (LF).

4. Input Selection

Input Selection is determined on an individual speaker basis. When a speaker requires multiple outputs,

whatever input is selected for the first output will automatically be selected for any additional outputs

reserved for that speaker. In addition, when “Ch A” is selected, “In 1” is automatically selected.

Same for “Ch B” and “In 2”. However, this auto selection can be overridden. Input 1 and Input 2

“(In 1 + In 2) / 2” can also be selected for an output, such as for subwoofers requiring a mono-summed

stereo input.

DLC24 Speaker Configuration Software