Specifications

Remote Control Indicator

This LED will illuminate green when the DLC24’s Control Selector Switch

is in the Remote position. Front panel controls are disabled and only PC

control is available.

Front Control Indicator

This LED will illuminate green when the DLC24’s Control Selector Switch

is in the Front position. Front panel functions are enabled. Associated

controls in the ADAM software are disabled.

Overload Indicator

This LED will illuminate red when clipping is present at any of the input

or output stages.

Communications Indicator

This LED will illuminate green when communication is present between

the DLC24 and a PC.

Heartbeat Indicator

Indicates the status of the internal DSP. If operating normally, this LED

will blink ON for 100 ms every second. If there is any type of hardware

problem, this LED interval will be ON for 250 ms and OFF for 250 ms.

Power Indicator

This LED lights green to confirm power to the DSP.

Attenuation Control

Controls the amount of signal attenuated to the channel’s assigned

output(s), ranging from 0 dB to 60 dB.

Limit Indicator

This LED will illuminate amber when there is any limiting associated

with that channel.

Signal Indicator

This LED will illuminate green when any signal is present at the input.

Polarity Switch

Inverts the signal’s polarity (0° to 180°) of the output(s) assigned to

the channel. This function must be “Enabled” in DLC24 Speaker

Configuration Software in order for this switch to operate.

Filter Switch

Provides a 24 dB/octave high-pass filter with a corner frequency at

100 Hz to the output(s) assigned to the channel. Speaker type can

affect this function. Subwoofers, for example, cannot be high-passed.

Operation

Front Panel Controls and Indicators