Specifications

AD-1000 Operating Manual
S/PDIF (Sony/Philips Digital Interface) – Consumer digital interface
Standardized as the CP-340 digital audio interface by the EIAJ (Electronic Industries Association of Japan) and
IEC 958, (International Electrotechnical Commission)
Transformer isolated balanced or unbalanced output to a two wire transmission line.
Output impedance: 75Ω
Signal amplitude: 0.5 Volts peak-to-peak into 75Ω
Sampling Rate Range: 32–54 kHz
Connector: 15 pin HD connector mounted on rear panel, Pin 1: Signal; Pin 6: Shell
(Note: requires adapter cable and/or adaptor to standard female ‘RCA’ connector or BNC)
OPTICAL – Digital optical interface standard for consumer applications (TosLink) and ADAT (multitrack)
Transmitter characteristics:
Peak emission wavelength 660nm ±30nm
Peak emission power between –15dBm and –21dBm (when measured at the edge of the refer-
ence optical fiber which is connected to the output terminal of the fiber optic transmitter)
Connector: standard to ‘TOSLINK’ style optical interconnect.
Page 29
Sync
Source
Pwr
Switch
Valid Sample Rate Selector Positions
1.001
Postions
32 44.056 44.1 44.144 47.952 48 48.048
Unmarked
Postions
Internal
Crystal
Either
Word
Clock
Either
AES
Sync In
Either
Either
SPDIF
Optical In
NOR
SPDIF
Sync In
ADAT
Optical In
ADA
NTSC
Video In
Either
PAL
Video In
Either
60 Hz
Video In
Either