User Manual

Setup Headphone/Speaker Mixes via Maestro Mixer
Since there are four low-latency mixers in Maestro, these can send different mixes to the various Symphony audio
outputs. For example, send one mix to the Line 1/2 output to your speakers, and a different mix to the Headphone
output."
1.
Open Maestro and click the Output Routing tab (or use the keyboard combination [⌘+5])
2.
Route a Hardware Output listed at the top of the grid to one of the four Mixer Software Outputs available on the
left of the grid by clicking the box where they intersect. This places an “x” in that location"
3.
If desired, continue routing other Hardware Outputs to any of the
other three Mixer Software Outputs

6.
Adjust the mixer channel faders, pan controls, and other settings to
achieve the sound desired.
!

5.
On the Left, show or hide the four
mixers by selecting the mixer 1, 2, 3,
or 4 button
!
4.
Select the Mixer tab (or use the
keyboard combination [⌘+6])

SYMPHONY I/O MK II - USER’S GUIDE Page 27